Too many Coffins

[krough]

My brother in-law got a line on some free used 3/8 plywood today.
After an afternoon of building I now have 5 toe pincher coffins

http://scarletorder.com/photos/halloween/images/1562/500x375.aspx
I plan on using one as my fog chiller, I am looking for ideas for the other 4.
I have a Bucky I could corpse and put in 1 but then that leaves 3, Any ideas?
This was an unplanned project but I couldnt resist the free nature of the plywood
Krough

[Mollins]

give me one? :P

[colinsuds]

I would have a bunch of dummies having a sceance around it with it shaking that would be kool. Or when someone walk by it starts shaking kinda like the monster in a box prop

[krough]

Hmm, I do have a 120 RPM dayton gear motor just waiting for a prop, maybe this is it. If I could get some sort of thrashing type motion. 120 RPM is too much for a Monster in a Box but for something rattling the coffin lid it may be just about right.

Krough

[maxcarnage]

I know you're looking for ideas for those coffins, but that motor sounds like it might make a great electric chair prop.....but then again, if you cut the voltage it needs in roughly half, it should still spin at roughly 1/2 the rpm, unfortunately, it won't have much power left....only 1/4 what it started out rated at...that is, if it spins at all, some wont

[mikeq91]

I don't know if you'd have time for this, but heres a great pop out prop that could be used in the coffin- http://www.halloweenfear.com/ScissorProp.html