Trigger (T-r-i-double-gr-r)

[DarkLore]

"Props" (pun intended) to whomever posted the thread on a 3-Way....whatever it was. I can't tell you how many times I saw the heading and figured one of the other make-n-take groups was having more fun than ours. Oh well, on to the topic..

I recently tore apart a headless Gemmy prop to make use of whatever I could salvage. It had a great sound board in it...loud, understandable, with a good pir trigger. So I asked a few of our electronics gurus for assistance on using the sensor and speaker to trigger a R/S audio card or other. (I wanted audio better suited to other props.)

Otaku shared a cheap solution he designed for triggering sound cards, leds, etc. He may have posted something similar using a darlington, but this one should be more reliable. With his permission, I'll post it here.

[DarkLore]

Otaku has a thread for a timer that works with a talking pumpkin insert from Radio Shack. Right now, those inserts go for less than a U.S. dollar on clearance.

Using this $1 toy from Radio Shack, you can take the screws off the top, remove the sensor, gut it for all the leds and free batteries, and then use that sensor to make this small board that can be used to trigger things that might otherwise use a contact switch.

In simple terms - make one of these to trigger cheap sound cards, leds, even those little cheap-ass screaming boxes.

For my purpose, I'm going to forego expensive solutions like amplified speakers and guitar amps connected to mp3 players for my individual standing props like shiatsu zombies, werewolf, and Frankenstein monster.

[DarkLore]

If you have ever talked to Otaku about electronics, it's easy to feel like Richard Dreyfess standing on Devil's Tower, watching the colored lights as they play the five tones. To put his language into mine, I created the following sketch....

http://www.mourningwood.com/IMAGES/PIR_TRIGGER.jpg

[DarkLore]

PLAY THE FIVE TONES -

The board takes the PIR sensor's voltage and uses it to switch an electronic thingie called a IRF510 MOSFET. The MOSFEt is used as a relay so you can dry trigger a device, or connect a device like one of the USB audio boards that has ~4VDC on it's trigger wires. The MOSFET will switch up to 5A at 100VDC, but if you need to switch that large a load you probably need a heat sink.

The PIR will send out 2-3 voltage pulses each time it "sees" a heat source, in the 2VDC to 3VDC range. There is a short pause between the sets of pulses as the IC resets, usually 3-5 secs. This means that devices that can't handle multiple trigger inputs in rapid succession will have a problem with either re-starts, shutdowns or both. Fortunately, the electronics123 (http://www.electronics123.com) USB board has a software option to ignore triggers while the board is playing. The 20 sec R-S boards also seem to ignore triggers during playback, as do ISD2500 series chips.

The following link shows the document he sent me.

Otaku PIR Circuit (http://www.mourningwood.com/files/PIR_circuit_Darklore.doc)


{see comments on later post, pertaining to the USB sound cards.}

[DarkLore]

Here's what it looks like.

http://www.mourningwood.com/IMAGES/pir_board.jpg

In this image from Otaku, the audio card (led lights, whatever) connect to the two wire terminal (green thingie). The pumpkin insert sensor wires are coming in from the left side of the image. His version has them connected to a fancy 3-wire connector on the board. I didn't have one handy, so I ignored that and soldered directly to the board.

The right side of the image shows wires going to a 9v battery connector.

[DarkLore]

I'm still hunting a few more talking pumpkin inserts in my area. (Hopefully my local make-n-take cohorts are ignoring this thread.) I had resisters, terminals, 9v battery connectors, and a couple of 7805s extra from my multiple voltage project (http://www.hauntforum.com/showthread.php?t=20317). For me...this was a cheap solution. Especially considering I gained six free batteries and 10 superbright leds from two pumpkin inserts.

(Thanks to Otaku, Fritz, and Hedg for info on sensors.)

[DarkLore]

http://www.radioshack.com/product/index.jsp?productId=3868524


http://rsk.imageg.net/graphics/product_images/pRS1-6845040w345.jpg

$.97


I got a kick outta the guy trying to sell me batteries at R/S. For $2, I got six batteries with these dudes. For those of you who don't want to trigger an audio card...you can't beat using these things in a pumpkin for .97 either.

[halstaff]

These are a great solution. I've made a couple of them with the USB board and the RS PIR and they work great!
I usually record a 20 to 30 second clip and then add silence to the end of the 50 second recording. This gives me a bit of a delay before the audio can be re-triggered.

[halstaff]

A couple of examples of these sound boards in action can be found on my YouTube page - http://www.youtube.com/user/halstaff#p/a/u/0/IJrGmKh9Gas
Both my grave grabber and the hallway skeleton use it for the sound source.

[DarkLore]

A couple of examples of these sound boards in action can be found on my YouTube page - http://www.youtube.com/user/halstaff#p/a/u/0/IJrGmKh9Gas
Both my grave grabber and the hallway skeleton use it for the sound source.

[Comments about sound rec/player removed - product was faulty. After receiving another, the new one worked fine.]

[fritz42_male]

I got one of the USB ones and piped it into an amp - I was actually very impressed with the sound - OK it ain't MP3 player quality but it is absolutely fine for most things. It ran a prop last year and was great but in playing around with it this year I think I've stuffed it up so need to order another few. It may just be the batteries though - I haven't got round to checking it.

I'm pleased with mine - well worth $10. Couple it to some cheap PC speakers.

[The Watcher]

I got some of the 50 second boards. I like them, they are as loud as my gemmy's. My LR is 14 X28 with a 16 ft sun room on it. They can be heard from from one end to the other. I used one in my the RE gun I build and amplified that with a first small first amp. But I told someone on that thread. I thought They would be better used for close up sounds, if you are not going to amplify them. Like bugs in a cave, creaking door, back ground sounds. Basically sounds that would be outside of you ambiance sounds, that could be triggered at a certain point. As for the quality, No they are not as goo as a 40 dollar mp3. But you still need to amp the mp3 also and triggering is much harder for most people ( me) Also I went though lots machine gun sounds to find one I thought sounded really good. But I had played with some sounds from the 4shared files when I got the first board in. They seemed to be fine. The Ap8, or the boards from cowlacious are better options for a higher quality sound. But if you already have it check out the 4shared files.

[fritz42_male]

Just FYI, I bought a cheap amp off eBay. USB (power only) out so I can get 5V to a sound board/picaxe. Sound is good when linked to a pair of stereo speakers from Kerby's

I got this one:
http://cgi.ebay.co.uk/USB-Hi-Fi-Audio-Stereo-Power-Amp-Amplifier-Car-moto-/170523629305?cmd=ViewItem&pt=Car_Amplifiers&hash=item27b40016f9

But this seems even better with the possibility of hacking it as well.
http://cgi.ebay.co.uk/Amplifier-Stereo-remote-USB-SD-FM-car-mp3-CD-lp-v9-/220650110566?cmd=ViewItem&pt=Car_Amplifiers&hash=item335fc57e66