March Gathering: IS IT SPRING YET???

[niblique71]

On Sharps suggestion, I went ahead and started this thread so I could Post the Parts list for the Grave Grabber, and get the ball rolling for our March gathering. I hope Patty doesn't mind.

We can work out the Date for the March build at our Feb Meeting. Although the parts list seems long, the actual quantities of individual items are very small. For example, for most of us, it won't make much sense to buy a full length of aluminum when you might only use 6". If we do this right we should be able to get the Grabber built for around $20. This assumes that we can get enough scrap wood for free and that you have a foam skull floating around.
================================================== ========
Here is the Updated Parts list. To save cost for everyone, I will "Group Buy" the Items in white. The cost for this stuff (aside from the Deer Motor @ $10) is around $10 ea.

Everything in Yellow YOU will need to bring to complete this build. Most of this stuff we have in our inventorys already

PLEASE SPEAK UP if you have any of the scrap wood below and would be willing to donate and share.

1 Piece of scrap 2” X 8 ” wood at least 12” long -Base
1 Piece of scrap 2” X 4 wood at least 7” long -Arm Slider
1 Piece of 3/16” X 3’ round Steel rod (Lowes or HD) -Skull support, Skull Prongs, Pivot, Stop.
1 piece of Aluminum Flat 1/8” X ¾” X 4” long (8’ Makes 23 pcs) -Linkage
1 Piece of Aluminum Flat 1/8” X ½” X 16” long (4’ makes 3 pcs) -Grabber arm
1 Piece of ½” “CPVC” at least 12” long (10’ makes 10 pcs ) -Grabber arm
1 White Bic Pen -Arm Guides
1 Foam Skull (Group Buy if Necessary? Most of us have one already) -Scaryness
1 Section of Pipe insulation 1” X 12”-14” (6’ length makes 6 pcs) -Shoulder
1-Roll Duct Tape (Most of us have it already, (Have?-Share?) -Fingers/hand
1 5' section of Heavy ceiling wire -Fabric Guards
1 Pkg Cotton balls (Only need a few, Most of us have already, share?) -Hand texture
1 Small tub Latex BlackCat has some -Hand texture
1 Can Black spray Paint (1 can probably paint 10 Grabbers. Buy Share?) -Camouflage
1 paint for your hands (personal preference, White, Grey, black, red? -Finish touch
1 Burlap, Netting, or whatever you want to dress her in (Jeff said he has a TON of burlap) -Finish touch
15- #10 Washers @ 4 cents each -Various applications
1- 5/16” Washer @ 5 cents -Motor arm Linkage
4 Thumbtacks or short roofing nails ` - Fabric Attach
1 ¼” nut -Extra Spacer for Pivot arm height
Parts List Continued:

1 Deer Motor (Group Buy) From Kindy's (http://www.kindys.com/products/decorating-accessories/replacement-parts) -Motion =$10.00

1 Piece of scrap Finish grade wood about 1” X 2 “ X 3” long. -Skull Pivot -Free
1 piece of 1/2” square steel tubing X 7” -Pivot Linkage =30 Cents
4 – 1 5/8 “ Deck screws @ 5 cents each -Motor mount & Arm Guides = 30 cents
4 - 2 1/2” deck screw @ 6 cents -Head pivot & Guide Block = 24 cents
1- 12” piece of thin Picture Hanging wire Head Movement = 03 cents
1 Section of Thin Ceiling hanger wire 6’ long (Have or Buy and Share?) -Make Hand
1- 6” 1/8” Auto-vac tubing Retainers = 15 cents
4 – Fence Staples-Free from My stock Secure 3/16” rod to wood = 00 cents
3- # 10-32 X 1 ½” @ 5 cents Linkage and Arm attach = 15 cents
3- #10-32 Lock nuts @ 5 cents Linkage and arm attach = 15 cents
2- # 7 X ½” Hex screws (Black) @ 5 cents Motor Mount = 10 cents
1- Small dab of automotive grease Arm Slider Lube = Free
1- Few drops sewing machine oil Linkage lube = Free

[trishaanne]

I'll buddy up with someone....I don't care who. Money is really, REALLY tight since I lost my babysitting job so the cheaper we can do this the better. And as you techy type guys know, I will really need to buddy up with someone during the build, since none of this stuff makes sense to me. My brain does not think in these terms. Looking at my book it looks like we're open most weekends if you want to start posting available dates so we can narrow it down.

[sharpobject]

I'm good any weekend in March. I don't have a calendar handy - do we know when Easter is this year?

[RoxyBlue]

I'm good any weekend in March. I don't have a calendar handy - do we know when Easter is this year?

April 24:)

[niblique71]

OK, I couldn't find anything cheaper in the stores to replace the "Pivot arm" which was 65 cents (for 7"). So I tested out some 1/2" square (Steel) tubing that I have in my own stock. It works GREAT and it will only cost 30 cents. The pivot arm has to be metal tubing (or channel) so the Grabber arm won't sag to the ground.

I also switched out the Grabber arm to CPVC ONLY (No aluminum underneath). It works OK, but had some unexpected herkey jerkey movement (Side to side). I think it actually slides too easily??

Anyone that want's to build it that way is free to do so to save about $1. It will work fine, but I just didn't like the movement. I'm going to recommend usig the 1/2" aluminum bar underneath as it was originally built. It allowed for a LOT Smoother arm motion.

[niblique71]

I Updated the parts list in the first post in this thread.

For those that haven't seen it, Here is the video of the tutorial that I made a few days ago. I sound rushed because YouTube would only let me post 15 minute videos. There are a few measurements missing that we'll cover later.

http://www.youtube.com/watch?v=zkzx92w5qus&feature=player_profilepage

[FRIGHTGUY]

Hey all! I just wanted to say that I am really looking forward to the March make and take. It was so great meeting everyone tonight, I really felt welcomed to the group and I will definitely be back! Thanks for such a great time, good food and some awesome laughs! Can't wait to build the grave grabber with you guys! (should have called it a butt grabber!)

[niblique71]

WOW what a great time for our first meeing in TOO MANY Months. I had a blast and it was great seeing everyone again.

The second batch of Deer motors has been ordered.

Just a reminder that everyone will need to buy a 3/16th X 3' long steel rod from Lowes or HD AND Bring a White Bic pen. Also, bring your foam skulls and perhaps some finishing items for your grabber like black spray paint and other paint for your grabber hand.

Karen said she'd bring Latex, and Jeff said he had a TON of berlap. If someone wants to add some "Neck" Just bring a small scrap of 2" foam. Cottenballs are cheap and I'm sure someone will volunteer to buy a bag for the group.

I will provide the rest of the linkage and hardware (Nuts, bolts, washers, and screws), including the small wooden pivot block.

Between Joe and I and others, we should have enough scrap 2X8 and 2X4 to build this thing. If anyone else has any 2X8 scrap, than let us know, so we can have enough wood (CAREFUL Sharon) for everyone. We'll need to confirm the amount of people taking part in the build and double check that we have enough.

TOOLS
We're going to need 3-4 Vise's and a few other power tools like Sawz-Alls, drills, and a few grinders with different wheels, and at least 2 miter saws, many extension chords and power strips etc. The more tables we have for this build the better. I'll post a more detailed tool list so we can gather some of the less common tools. I know that between us we'll have everything we need.

LASTLY, we need to set a date and a location (I assume it's Patty's again?). I'm free any weekend in March although the earlier in the month the better, since my busy season is FAST approaching.

[trishaanne]

We're good for any weekend except the 5th and 6th.

[Joiseygal]

I can't go the last Saturday in March. Greg how heavy can the head be on the prop? I would like to make one out of a styrofoam wig head before the meeting, but I don't know if it would be too heavy for the prop? If not than I will just bring a styrofoam skull.

[Vlad]

Great job greg! The list of places im not needed grows on lol. hope to see you there.

[DarkLore]

I've emailed Kindys via their online contact form. However, there is no contact phone number (that I can find) on their website. Is Kindys a year 'round business?

We're considering this for a m-n-t this coming weekend. Any ideas on other suppliers of the deer motor that auto reverses in the same manner?

[niblique71]

I've emailed Kindys via their online contact form. However, there is no contact phone number (that I can find) on their website. Is Kindys a year 'round business?

We're considering this for a m-n-t this coming weekend. Any ideas on other suppliers of the deer motor that auto reverses in the same manner?

I just ordered a second round of Deer motors from them for this build (yesterday). Yes they are a year round business.

If you order 9 or more the shipping is free, other than that you can just order them (unless I wiped them out) anytime. They have the Old model and the NEW model deer motors. I used the "old" model that comes with a crank arm for my build. The newer motor is easier to mount, but doesn't come with a crank.

I would HIGHLY recommend that you DO NOT build the Grabber using the auto reversing capabilities of the Deer Motor!!! I volunteered to do the prototyping of the original design and did extensive testing on these motors and thier longevity using this mode. Since we were going to build up to 20 of them, I wanted a LONG lasting prop that was still Cheap. The deer motors began to fail to autoreverse within 4-5 hours, AND there was a TON of unecessary wear on the gears and output shaft. The problems got worse and worse as I put more hours on them. In all, I got about 10 hours of run time before the auto reverse failed every 10 minutes. Take a look at my OAGG Tutorial video (http://hauntforum.com/showthread.php?t=25755). The "new" design now has over 90 hours of flawless operation. It DOES NOT use the Autoreverse and provides the EXACT same motion as the original

If you or your group have any questons, I would be VERY happy to assist you.

[niblique71]

I can't go the last Saturday in March. Greg how heavy can the head be on the prop? I would like to make one out of a styrofoam wig head before the meeting, but I don't know if it would be too heavy for the prop? If not than I will just bring a styrofoam skull.

Sharon, If you made a head similar to your "Secret Santa" gift, it should be OK. You will probably want to cut the base (neck area) to a more reasonable length for this application. You can certainly leave some of the neck, Just shorten it to a reasonable size.

[Joiseygal]

Ok cool thanks Greg! I will work on the head and the hands before the meeting!

[medusaPA]

I am available any weekend in March but I would like to know the date soon, because I want to go to Florida for a weekend. I had a great time!!!! Thank you Patty and Ken! Jay I was waiting for you at the Sheraton???? bwahahahaha:D

[medusaPA]

I have no idea what I am doing so I am going to need a lot of help

[trishaanne]

Irene, you really messed with me there for a second. I thought maybe we had someone else from out of state that wanted to join us. Then you mentioned our names and it freaked me out...there were so many people here the other day that I thought maybe I missed someone...lol. And then you mentioned the hotel and BINGO, I knew who it was. Glad you joined us!

Oh, and BTW, Jay WAS at that hotel. We drove him over and checked him in. He was in a room up by the office. LOL

[medusaPA]

I know Elaine told me on the ride home, that's so funny, we were surprised he did't come knock on my door, Elaine asked if I had any visitors in the night, lol

[FRIGHTGUY]

For a minute I thought you meant me Irene and I was like Sheraton..huh..what? I know I had a lot of jello shots but um. I have to remember I am Jay "Light" Haha!

[Vlad]

So is the next meeting at jays room at the sheraton?

[trishaanne]

I don't think so, because while Jay may not have known where he stayed, it was the Days Inn...lol.

I'm working on making space downstairs for us all to have work space. We did that one other time a few years ago and it worked. That was when we put plywood on the pool table and air hockey table and then a few other tables should fit too.

[Joiseygal]

LOL...MedusaPA actually had me thinking twice about the people that were at the meeting. I know I am shot as it is without alcohol that it made me nervous that I didn't remember the other new person. Anyway welcome to the forum Irene and now you are official. Oh by the way your dog is so cute! When you breed her make sure you save one for Romella. :) (Right Devin!?!?!?)

[medusaPA]

I think the meeting at the Sheraton is a great idea, lmao!!!!! Is ther even a Sheraton around there, hahaha, I will save you a puppy Sharon for Romella!!

[Joiseygal]

I will save you a puppy Sharon for Romella!!

I think Devin is going to kill me! If I didn't have two dogs already I would of definitely wanted one because she was adorable.

Just wanted to give you guys a heads up. www.woot.com is selling Philips Portable Speaker System 2- Pack for $12.99. I'm not sure if you ever check the Sponsor and Vendor section, but here is the link: http://www.hauntforum.com/showthread.php?t=25814
I'm not sure how these work, but the video looks like the sound is pretty clear and loud. Also it can run right off of your mp3 or ipod battery, so that will limit more power sources. Ok well check it out if you want! Maybe someone else from the group that had experience with these can give more information.

[Vlad]

Sold out on Woot.

[medusaPA]

Elaine you are going to have to help me because I have no idea what I am buying, this will be the first thing I am making since I was to drunk at the last make and take at your house when we camped! I think I should get right to making at the next one and then drink, lol

[medusaPA]

That's ok Romella, I can sneak one to you, he'll never know. :D

[sharpobject]

I got your back Irene. I'll make sure we have everything we need. You may want to get in the group buy for the deer motor and order 1 or 2 from Greg.

[niblique71]

I got your back Irene. I'll make sure we have everything we need. You may want to get in the group buy for the deer motor and order 1 or 2 from Greg.

Everyone should double check the "List" in post #1 of this thread. KEEP CHECKING it as we get closer to the build JUST IN CASE I need to Update it again. Everything that listed in Yellow, I didn't buy and you will need to buy/bring it on build day. There are some substitutions you can make on that List Like:
================================================== ========
Hot Glue instead of tacks to attach your fabric

Small plastic tubing (rubber or vinyl) for your finger joints

Foam wig head instead of a foam skull

Old shirts or light coats to decorate your grabber
================================================== ========
I purchased enough materials (in white) to build about 15 grabbers.

The Deer motors should be here today or tomorrow. There should be 3-4 motors available for those who haven't already ordered one. I will bring them to the build. Between the motors, and the "Group buy parts, the total will be around $20, So bring a few extra $$$. The 3/16ths rod that you will need to buy cost $2.49 at Lowes or HD. I did buy a few extra 3/16th rod JUST IN CASE.

I'll get a tool list together soon because we will need a few extra power tools that I know a few of us have.

[medusaPA]

I can't post threads yet till I have so many posts, but I think it would be great if we could all get together on a weekend and go to Gettysburg or something like that and go on a ghost hunt, I have all the equipment for it, if you can't afford it we can share rooms. Just a thought :). I have so much fun with all of you!

[GhoulishCop]

Well I'm all for shacking up on a road trip, so long as it coed dorms. Now there's a party. I'm willing to make a charge through some, um, peach orchards. Woohoo!

Rich
Who is of course only referencing Pickett's Charge...:biggrinvil:

[medusaPA]

hahaha Rich!!!!

[FRIGHTGUY]

Some ghost hunting sounds fun to me! Did we start discussing march dates for the build yet? I just want to be sure ill be free.

[niblique71]

How does March 12th sound to everyone??

[FRIGHTGUY]

I have parties on the 5th & 12th. Im open the 19th, 20th or 26th, 27th.

[trishaanne]

Can we shoot for the 19th? I have client meetings that I need to set up soon and I can get them out of the way before the 19th. If so, let's arrange to get started around 10AM since we are actually building something.

[niblique71]

19th sounds good to me... Let's hear from a few others before we write it down in our stone tablet.

[hpropman]

The 19th is no good for me I will be camping on the USS New Jersey with he scouts.

[trishaanne]

I'm open to Sundays too if that is easier for everyone.

[NoahFentz]

I work every Sunday....but I really wasnt going to build one of the grabbers. I was thinking of working on another wighead since I got more supplies from my secret santa. Im open any weekend so far....I know this month is heavy birthday month too...

[medusaPA]

26th is good for me

[medusaPA]

Some ghost hunting sounds fun to me! Did we start discussing march dates for the build yet? I just want to be sure ill be free.

I have all the Ghost hunting equipment, it's a lot of fun

[Haunted Bayou]

(sorry...wrong thread):D

[Joiseygal]

Haunted Bayou is coming to our meeting? Cool! :)

March 26th is the only day I can not do it! I am available any other Saturday or Sunday! :)

[trishaanne]

Holy crap.....we're getting guests from TEXAS now too? I really need to get a bigger house...lol. Guess I'll keep the guest room made up!

[sharpobject]

I'm open any weekend in March - however, I'd rather not do Sunday if we can help it. I need Sunday to recouperate from the Make and Take.

[Joiseygal]

Looks like I'm the only one that can't go March 26th, so I guess that would be the best day for the rest of the group. If you have to make it March 26th than I will just skip this month.

[niblique71]

I can dig up some of that stuff too...I think I have pool noodles, washers, deck screws (not sure of the size) maybe some lock-nuts, burlap, I may have some aluminum stock.....I'll dig around on Friday to see what all I can come up with.

The list states "white bic pen"....if that is the bic biro pens I am pretty sure I have several of those from work but they are yellow. I don't think the color matters so I'll bring those too.

You want the tubing from a "White bic Pen" for the arm guides. Color doesn't matter of course. It looks like small pvc when you remove the ink cartridge. The Clear plastic pens have a brittle tube, and would probably break when you cut them and screw them down. One pen should make two grabbers since you only want two 1" pieces.

[FRIGHTGUY]

So far the 26th sounds good for me. Greg, would a fully detailed wig head work with the grave grabber, would it support its weight? I have a few wig heads so I may go that route and detail one before our build.

[FRIGHTGUY]

Random note to the group. On my blog I started an interview section called "deadtime stories" I did one already with Mr. Macbre but was wondering if anyone in the group would be interested, the more the merrier! Please let me know or pm me. Id like to put a new one up this march.

[GhoulishCop]

Due to my grueling schedule I'm only available...every weekend! God, being retired is hard.

Rich
Who apologizes for being such a di@k [sort of]...go ahead, send that middle finger smiley my way

[grimghost]

Since I did not get any response fro the separate post, I will ask here: Any up for the Sundown Zombie crawl Saturday in Seaside? Not planning on staying at the bar long, just want to do a zombie crawl (ZC Virgin alert:) )

Also a quick question: I do not have access to any Halloween makeup. Will standard Ladies makeup work to "Zombie up" my face"? If so, please recommend what to get

thxs
GrimGhost

[FRIGHTGUY]

Sorry grim, I have plans saturday. As far as makeup goes. You can go to any local store like a walmart,target etc and pick up a packet of gelatin..its great for making dry cracked skin and wounds. Add some red food coloring to the gelatin for blood. Black eye liner can be smeared for dark circles under ur eyes. By some press on nails and score and chop up the ends then paint them with green black and brown coloring for some creepy nails.

[Vlad]

Any weekend is good for me.
I'll bring a workmate vise bench.
A vise.
A grinder with different wheels.
Drill and bits.
Two extension cords.
Four power strips.
Sawz-All??? I'll bring a reciprocating saw.

Let me know what else.

If doing it on a Sunday can get everyone there then let's do a Sunday. I like it when Elaine has to suffer.

[Haunted Bayou]

LOL!

oh man...I was wondering who changed their avatar to the kid from Poltergeist.
I clicked on the project list, then scrolled down instead of going back to the other thread to reply.

Sorry about that.

[Vlad]

That's ok, we'll come down there.

[niblique71]

So far the 26th sounds good for me. Greg, would a fully detailed wig head work with the grave grabber, would it support its weight? I have a few wig heads so I may go that route and detail one before our build.

It should work. Sharon asked me the same thing earlier. I wouldn't want to put a heavily latexed or monster mud wig-head on it. But Something like what sharon did with her Secret Santa gift should work. Hers didn't look that heavy to me. Good thing I overdesigned the skull support.

[FRIGHTGUY]

Sounds good! I'll see what I come up with and try to keep it lightweight.

[Joiseygal]

If Elaine can go and just suffer this once I would love for it to be a Sunday so I can attend! PLEASE ELAINE!!!! Figures the one Saturday I can't go everyone else seems like they are available.

[GhoulishCop]

Despite my lazing about all the time, I am unavailable for the zombie crawl as I'll be making my pilgrimage to Delaware to visit my kids that day.

Without casting aspersions, since I know a bunch of you have done these in the past (Sharon, I know you have), but I'm not sure I get the point of one of these things anyway. However, if the point is to zombie-walk your way to a bar, well heck, I just might be up for that.

I don't need much inducement to drink a beer, and doing it in zombie costume would be a new experience, but what's up with doing it in the middle of winter? Wouldn't a month with a more mild temperature be better, you know so you didn't have to cover up your shredded clothes with a parka and snow boots?

Cheers,
Rich

[Joiseygal]

GC if you had to be in your birthday suit and it involved beer you would be there! I will also have to pass this Saturday on the Zombie Crawl. I just scored a toilet and a sink and have to find room for it, so I will be re-organizing my whole basement to make room. :) Now I have to think of some cool things to do with the toilet. I already have an idea for the sink.

[sharpobject]

If Elaine can go and just suffer this once I would love for it to be a Sunday so I can attend! PLEASE ELAINE!!!! Figures the one Saturday I can't go everyone else seems like they are available.

OK - I'll take one for the team and "suffer" thru it.

[sharpobject]

So what date are we looking at for March?

Also - if you guys want to do another Make and Take overnighter at my house - start thinking of some dates and we can discuss further at our March meeting. I just want to plan early so we can pick a day that's best for everyone. I wouldn't be opposed to having it over Memorial Day weekend either if that's more convenient.

[FRIGHTGUY]

Hey guys and ghouls! I went to lowes to get some supplies for the build and picked up a few 3/16" x 3" rods and some extra aluminum in case anyone will need any. I also have a few feet of burlap in my stock that I will bring in case anyone needs and 2x8s for the base. Have we settled on the 26th yet?

[Joiseygal]

Hey guys and ghouls! I went to lowes to get some supplies for the build and picked up a few 3/16" x 3" rods and some extra aluminum in case anyone will need any. I also have a few feet of burlap in my stock that I will bring in case anyone needs and 2x8s for the base. Have we settled on the 26th yet?

I think Pattie has been busy with her family, so give it a few days. I am hoping we can make the meeting on a Sunday just this once because I really want to work on this project.

[grimghost]

Sunday the 27 could work for me

[GhoulishCop]

"I think Pattie has been busy with her family, so give it a few days."

Bah! There's nothing more important than our next M&T. We can rest when we're dead.

Rich

[trishaanne]

OK, the family is gone and I can breath again (until I try to get temp. custody of the kids anyway). The only weekend we are busy is this coming weekend, so you guys pick a date, give me a day or two notice to make room for everyone and then show up. Simple! :p

[Joiseygal]

Sunday March 27th would be good, but I'm pretty much available any Sunday except the first Sunday of March. :)

[medusaPA]

LOL!

oh man...I was wondering who changed their avatar to the kid from Poltergeist.
I clicked on the project list, then scrolled down instead of going back to the other thread to reply.

Sorry about that.
That would be me MedusaPA, hehe

[medusaPA]

So what date are we looking at for March?

Also - if you guys want to do another Make and Take overnighter at my house - start thinking of some dates and we can discuss further at our March meeting. I just want to plan early so we can pick a day that's best for everyone. I wouldn't be opposed to having it over Memorial Day weekend either if that's more convenient.

Memorial weekend is great for me!!! If anyone throws jello shots at me this year I'm shoving them up their you know whats, hahahaha

[medusaPA]

Hey everyone this is off topic but Asbury Park on Facebook is taking a pole on when everyone wants the next walk to be, I voted for May, it wasn't to hot or cold, and it's mid year, more fun I think!!!

[FRIGHTGUY]

The 27th could work. I have a few family birthdays this month (one on the 29th) that we will probably do something for on the 26th or 27th but I should be able to work it out. I def don't want to miss this build. I'm going to bring my wiper motor this time to so maybe someone can help me figure it out.

[trishaanne]

I voted for the end of September. I've been talking to Jason on facebook and there is a meeting coming up where they get a better idea of what's going on.

[trishaanne]

Oh, and Jay, the guys to ask about the wiper motor would be Joe, Greg, Ken or maybe Rich. Gotta get to them early though, before they can't "think" straight..lol.

[FRIGHTGUY]

Will do Trishaanne! That's if I can remember after getting bombarded with 20 jello shots!

[Joiseygal]

You are not allowed to vote Pattie if you are voting for the end of September! Ok so how does a Sunday in March sound to everyone else and what Sunday works out the best????? Come on guys lets set a date because March is tomorrow!

[Vlad]

Beware the ides of March

[grimghost]

The weekend of March 12 & 13 is only one really bad for me. Monster Mania or Saturday and Grandkid's party on Sunday.

[Joiseygal]

So Sunday,March 20th or Sunday,March 27th? Does anyone else have a problem with one of those days? Which one would be better?

[trishaanne]

LOL....Sharon...I was voting for the end of March for the Zombie Walk..lol.

It looks like the weekend of the 26 or 27 is what we'll go with for our meeting. Pick one! My weekends are booking up with meetings so I need to know when to NOT schedule one.

[Joiseygal]

It seems like everyone is available Sunday March 27th? LOL...Sorry Pattie I thought you didn't want to see us for another 5 months! :( I will have to check out the Asbury Park Zombie Walk Facebook page....Thanks!

[medusaPA]

Sunday 27 is good for me but can we come the night before to drink, lmao!!!! Don't worry I'll stay at a hotel after or you can come to my room and drink right Elaine?

[medusaPA]

I voted for the end of September. I've been talking to Jason on facebook and there is a meeting coming up where they get a better idea of what's going on.

Yeah End of September for Zombie Walk would be great! I really want to go this year I have some great ideas for a better costume!!!!!

[medusaPA]

Will do Trishaanne! That's if I can remember after getting bombarded with 20 jello shots!

You have to duck so they hit someone else, lmao!!!!:D

[FRIGHTGUY]

Yeah you almost took gregs head off when you chucked one at him that day. I think the yankees or mets might be looking for another pitcher in their starting line ups so you might wanna try out!

[trishaanne]

Here's the deal kiddies. I just scheduled an appointment with another one of our brides..that was the only date we both had available. SOOOO...around 11:45 Kenny and I will be leaving for probably 90 minutes or so. Looks like we won't finish our project but that's ok. Anyway, do you think I can trust you nice people NOT to blow up, paint, torch, or move my house while we're gone?

[medusaPA]

Yeah you almost took gregs head off when you chucked one at him that day. I think the yankees or mets might be looking for another pitcher in their starting line ups so you might wanna try out!


hahahaha:p

[sharpobject]

OK - so the next meeting is Sunday, March 27th ??? which is fine with me.

[niblique71]

Sunday, March 27th it is. I like the Idea of drinking the night before..... Too bad the hotel would frown on having a campfire in your hotel room Irene.

[FRIGHTGUY]

Trishaanne..i think you can trust everyone to not paint your house..mmmm the rest im not sure about!

[medusaPA]

Just so everyone knows I changed my avatar to my Zomie pic of me, so don't be scared!

[medusaPA]

Sunday, March 27th it is. I like the Idea of drinking the night before..... Too bad the hotel would frown on having a campfire in your hotel room Irene.

We could have a campfire in the parking lot, bwahahahahah.

[trishaanne]

If you want a fire I have a firepit in the back yard, but you'd all have to bring sleeping bags to sleep in the extra room, or camp outside and the ground is a bit cold still!

Does this mean it's a two day event? The last one was three days and was fricken awesome!!!!!

[FRIGHTGUY]

Not to jump off topic but I have the dc prop building handbook vol 2 and was gonna bring it with me. Maybe there is something in there for a future build though its a bit techy so I dont know, maybe our tech guys can flip through it and make better use out of it than I can.

[medusaPA]

Off topic but is anyone going to Monster Mania next weekend 11-13 here's the link http://www.facebook.com/l.php?u=http%3A%2F%2Fwww.monstermania.net%2FMMC17_ GUESTS.html&h=44b1c? Let me know if anyone is going are you going Elaine? or do you want to go? Asbury Zombie walk is going to have a vendors table there.

[trishaanne]

Kenny and I have gone to a few of these but there really wasn't anybody there this time that I was interested in seeing. Well, maybe the Walking Dead cast cause I like that show, but not many others. We've got a meeting that day but if we get done early enough we may shoot down there.

[sharpobject]

Off topic but is anyone going to Monster Mania next weekend 11-13 here's the link http://www.facebook.com/l.php?u=http%3A%2F%2Fwww.monstermania.net%2FMMC17_ GUESTS.html&h=44b1c? Let me know if anyone is going are you going Elaine? or do you want to go? Asbury Zombie walk is going to have a vendors table there.

Sorry Irene - not planning on going to the Monster Mania. It's Ralphie's last weekend home for spring break. If you go, make sure you take lots of pictures.

[diggerc]

27th is open for me

[diggerc]

can trust you nice people NOT to blow up, paint, torch, or move my house while we're gone?

Animals are fair game?

[niblique71]

Since our March meeting is happening so late in the month, we'll be facing a quick turnaround for our April meeting. I suggest we start looking at projects for our April gathering. We had some suggestions in previous threads. Any Ideas??

[GhoulishCop]

Not to jump off topic but I have the dc prop building handbook vol 2 and was gonna bring it with me. Maybe there is something in there for a future build though its a bit techy so I dont know, maybe our tech guys can flip through it and make better use out of it than I can.

Oh, sure, way to derail the fun, FrightGuy. But I'd like to take a look at the book. I have all four (five?) volumes of Terror Syndicates prop building books so I'd like to take a look through the DC Props one. I was just listening to Brent Ross on Hauntcast last night discuss his new designs and they sound pretty good. I've been thinking about picking up his series so it will let me see if it's worth it.

I have an idea for a pneumatic prop I want to build this year and will need to build some kind of armature for it. Maybe the book will give me an idea.

I'll bring my books if you care to take a look through them. I have one TS video as well. Useful, in that it lets you visualize more of what's been said in the books, but I'm not sure it really breaks new ground.

Maybe we can start a haunted lending library here. If anyone has the Mitchell's "How To Haunt Your House" book (vols. 1, 2, or 3) I'd like to see it (them). They look sumptuous in their design (a real change from the TS books) and supposedly have some real good ideas in them as well as step-by-step instructions. I hear the second volume is more advanced than the first, but still a quality product.

Cheers,
Rich

[grimghost]

medusaPA,

I will be attending the Monster Mania event on both Friday night and Saturday day. Parking is REALLY bad at times, so let me warn you. If you are not interested in seeing anyone in particular, I would recommend Friday night, it is less packed. I will be there in my HauntCast t-shirt handing out flyers to support Hauntcast. Hope to see you there

GrimGhost

[FRIGHTGUY]

Hey Rich!

A Lending library sounds good! Brent's books are great but they are geared towards those who aren't pneumaticaly challenged haha! I'm hoping I can learn some stuff like this in our group from you guys. I would love to see the TS Books and DVD, I have been meaning to buy one. I just ordered the Mitchell's prop book Vol. 2, there stuff is more my speed. I will bring both to the this months make and take and if you want to borrow the DC book your more than welcome to it.

[GhoulishCop]

At the risk of throwing a curve into the plans for the M&T, I found this grave grabber online. Rather than just one arm, it's a two-armer. It doesn't seem like it would be that much more difficult to build than the one arm.

http://www.fulcrumsites.com/haunt/html/the_grave_grabber.html

After I build the one-arm guy (I've got a good spot for him in my yard display), I may try and do the two-arm one.

Rich

[niblique71]

At the risk of throwing a curve into the plans for the M&T, I found this grave grabber online. Rather than just one arm, it's a two-armer. It doesn't seem like it would be that much more difficult to build than the one arm.

http://www.fulcrumsites.com/haunt/html/the_grave_grabber.html

After I build the one-arm guy (I've got a good spot for him in my yard display), I may try and do the two-arm one.

Rich

Hey Rich, I already built one of those. I'd be happy to bring it to show you the mechanism. It's actually easier than the OAGG.

[madmomma]

I'm coming in at a late hour but the 27th is okay for me for now...depends on a few uncertain things.

Reading through these 11 pages was quite interesting...Jay and Irene at the Days Sheraton, some random jello shooting, painting and bonfire building??? Oh well, will check out my local HD and scour around for all the fixings of a grabber. LOVE the video Greg. If it turns out I can't make it on the 27th, I'll see if I can attempt to build it myself. But I really don't want to miss this M&T if I can help it!

[slightlymad]

Yeah about that maybe i shoulda went to rehab with the ex-girlfriend.

[diggerc]

Yeah about that maybe i shoulda went to rehab d.
Jay You have a problem with fire too?

[niblique71]

I'm coming in at a late hour but the 27th is okay for me for now...depends on a few uncertain things.

Reading through these 11 pages was quite interesting...Jay and Irene at the Days Sheraton, some random jello shooting, painting and bonfire building??? Oh well, will check out my local HD and scour around for all the fixings of a grabber. LOVE the video Greg. If it turns out I can't make it on the 27th, I'll see if I can attempt to build it myself. But I really don't want to miss this M&T if I can help it!

Just a reminder to Mad and everyone else that will be building the March Project. REMEMBER to refer to the first post in this thread for the Items you will need to bring or buy. I already purchased EVERYTHING else for the build in order to save overall costs. The most important item that everyone needs to buy is that 3/16th" X 3' rod (non-threaded) from Lowes or HD. I just couldn't get enough of them from 1 store. It's $2.42

The second set of motors already arrived.

[Vlad]

I've found a home for the air compressor stored at Pattie's. Rich we may need transport help on this one getting it over to Sharon's house. We need someone dependable, but are willing to settle for your help, heehee.

[GhoulishCop]

That and her big block of foam? Good thing Jeff won't be coming this month, might have been required to strap him to the roof like a prop. As long as I don't stop and get gas...

Always glad to help a fellow haunter. 'Specially Sharon. She knows how to repay me!

And Vlad, I like your new quote. Reminds me of an old Steve Martin quote: "A day without sunshine is like...night!"

Cheers,
Rich

[NoahFentz]

That and her big block of foam? Good thing Jeff won't be coming this month, might have been required to strap him to the roof like a prop. As long as I don't stop and get gas...
Rich

I see...so that's why it was switched to Sundays!! I get it...LOL

[trishaanne]

I guess that means there's no room for the sheets of styrofoam Rich said he wanted! If you're really going to take this compressor, we'll have to dig it out but I certainly do appreciate it. It will be more convenient for you north Jersey folks to use up there anyway.

[Joiseygal]

Thanks Pattie...it will definitely go to good use! Also I will put as much foam as I can fit in my car for Rich, so you will have more room. I just found out yesterday that the little boy I babysit's party got switched to Sunday. I was so mad because I had you guys reschedule the Make and Take for me. I told her I already have plans, but if you want to switch it back to Saturday than that would be fine. I'm not sure what day works better for everyone. I don't care either way now because if it is Sunday I'm going to the Make and Take. If we do have it Saturday than we might get a chance to see Jeff strapped to the roof of Rich's pick up truck!

[trishaanne]

Either day works for us. If it's on Saturday I won't have to leave you freaks here alone in my house for a few hours! OK, OK,...I vote for Saturday!!!! :D
Hopefully everyone will start chiming in about which is better for them! OK KIDS....start voting on the 26th or the 27th! AGAIN!!!!!!!!!!!

[Joiseygal]

Sorry everyone for the confusion! Anyway I just wanted to let you know that I posted the video of our Christmas Party. Here is the link in our last Make and Take thread: http://www.hauntforum.com/showthread.php?t=24953&page=10

[sharpobject]

If it's not going to matter much - I prefer Saturday. Not to mention, if it's on sunday, I don't think Ralph would be able to come. I'll have to check with Irene to see if Saturday is good for her.

[GhoulishCop]

Methinks Sharon posted the video of the Christmas party to make us forget she's screwing up the meeting date plans.

But since I think most of us preferred Saturday anyway -- and only changed it to accommodate Sharon in the first place -- switching it back (to accommodate Sharon again) probably wouldn't be too much of a problem. Jeff ought to be able to come if it is Saturday, and then we can see him strapped to the truck's roof.

Boy, Sharon, you do hold a lot of sway with this group.

Rich

[niblique71]

I like saturday better as well...

[NoahFentz]

Methinks Sharon posted the video of the Christmas party to make us forget she's screwing up the meeting date plans.

But since I think most of us preferred Saturday anyway -- and only changed it to accommodate Sharon in the first place -- switching it back (to accommodate Sharon again) probably wouldn't be too much of a problem. Jeff ought to be able to come if it is Saturday, and then we can see him strapped to the truck's roof.

Boy, Sharon, you do hold a lot of sway with this group.

Rich

LOL!!!!!!!I can hear Vlad in the back ground while yer strapping me to the car..."Put it on! Put it on!"

[NoahFentz]

Oh! and if you switch it back to Saturday....I get CAKE!!

[sharpobject]

If having it on Saturday means cake then I know what day the group will pick. :D

[medusaPA]

Saturday is good for me, who's making the cake????? Did you suggest me or something Elaine, lol

[trishaanne]

I can make a cake...I have something special in mind. But since there are two birthdays, if you want to make another one that's fine. I'll do devils food and you can do a yellow if you want. There are at least 2 birthdays this month that I know of. Ken definitely gets devils food, and since Jeff's birthday is one of them too, I'm thinking we need a BANANA cake :eek:.

[NoahFentz]

mmmm.....banana...as long as Peanut gets to watch me eat it!!

[medusaPA]

I'll make whatever kind of cake you want, with whatever design you want.

[Vlad]

Jeff ought to be able to come if it is Saturday, and then we can see him strapped to the truck's roof.

I've seen that before, can't we strap him under it this time?

[GhoulishCop]

Vlad,

"I've seen that before, can't we strap him under it this time?"

Is it me, or is there a lot of Jeff getting tied up here? Do I sense some sort of bondage fetish?

Rich

[FRIGHTGUY]

So are we doing this on March 26th now? Do I need to bring whips & chains and a latex party suit?

[madmomma]

Oh my! FrightGuy is fitting in quite well with this group...and that is SCARY! Cool! LOL

So the meeting IS Saturday, March 26, 2011???

[trishaanne]

Yes, the meeting is Saturday the 26th. FRIGHTGUY, PLEASE don't encourage them...lol. You were my only hope of leaving this group unattended for a little while. I was planning on using you as the kid that the teacher puts in charge when she leaves the room...LOL. Guess that got shot to hell! I'm guessing that since we are actually building this meeting we may want to get an early start...say around 10? If it's a little warmer outside I'll put the cover back up on the carports and fire up the firepit for extra warmth. I'll need a little help though because, as you know, Kenny and I are vertically challenged and it takes forever for us to do that!

[FRIGHTGUY]

haha! Sorry to shoot down your hopes and dreams but like all haunters..im just as crazy and would only welcome the insanity..plus after the 20th shot that vlad and greg feed me I couldnt promise that I could brimg order to anything lol.

[GhoulishCop]

Wait! There's drinking that goes on at these meetings? I never knew.

But the corrupting influences are everywhere. It's easy to see how FrightGuy would get sucked in so quickly.

Hey, Greg, how long does this prop take to build (taking into account all those corrupting influences, of course)? Will this be one of our usual get the base built and then take it home to complete, or is it much simpler than that? Just trying to figure what essentials are needed since I'm still moving soooo slowly on my Halloween projects.

I love my paper mache so I'll be using that to make my head and arm, and still have to make both. I'm thinking the arm would be more important than the head if only to get the proper movement and alignment in place...assuming once again that consuming vast quantities of alcohol, ass grabbing, and other assorted sado-masochistic endeavors don't sidetrack us too much.

Rich

[Joiseygal]

I will be a the meeting, but I have to leave around 5pm. I will explain later, but I'm baby sitting at the moment. I see FrightGuy has adapted very quickly to the group! :)

[niblique71]

Wait! There's drinking that goes on at these meetings? I never knew.

But the corrupting influences are everywhere. It's easy to see how FrightGuy would get sucked in so quickly.

Hey, Greg, how long does this prop take to build (taking into account all those corrupting influences, of course)? Will this be one of our usual get the base built and then take it home to complete, or is it much simpler than that? Just trying to figure what essentials are needed since I'm still moving soooo slowly on my Halloween projects.


Rich

Rich, depending on your alcohol consumption, there is a good chance that most of us will have a completed prop by dinner with the possible exception of the hand and some skull details. If you are making your own hand or skull, make them as lightweight as possible. The mechanism isn't designed for a heavy skull and hand.

For those that want to make a hand, I suggest you be on time to start your hand first. With some luck it should be dry enough to install on your grabber by dinnertime. Good latex is "dry to the touch" within 4 hours or so depending on the weather.

[FRIGHTGUY]

Greg, is there somewhere online that I can find yhe imstructions to build the hand jig? I might make one this week and get started on my hand, if I do make one I will bring it so we have more than one to work with.

[medusaPA]

So are we doing this on March 26th now? Do I need to bring whips & chains and a latex party suit?


WOW!!!!!! I'm in love, lol!

[medusaPA]

Greg, is there somewhere online that I can find yhe imstructions to build the hand jig? I might make one this week and get started on my hand, if I do make one I will bring it so we have more than one to work with.

yeah Greg let me know if there's a link somewhere to look at so I can build one before the M and T

[niblique71]

Greg, is there somewhere online that I can find yhe imstructions to build the hand jig? I might make one this week and get started on my hand, if I do make one I will bring it so we have more than one to work with.

I finally had some money to buy some good latex from Micheals art store. Since it rained today I had time to make a few hands. Here's the link which also has a few pics of the hand jig I made. Just use your own hand as a guide, and create some extra pins to make some larger hands. I used the same 3/8" rod that we'll be using for the grabber build to make the Jig. The pics should be self explanatory.

Grabber hands (or anything else you want to use them for) (http://hauntforum.com/showthread.php?p=529968&posted=1#post529968)

[FRIGHTGUY]

Thanks Greg!

[GhoulishCop]

Since we have no fear of going off topic on these threads, I thought I'd give a shout out to FrightGuy for some innovative stuff he's doing on his blog, Grimlock Manor (http://grimlockmanor.blogspot.com/).

I've been following his blog since he crashed the last M&T and -- horrors! -- fit right in, and I think he's doing some innovative stuff over there. In addition to regular blogging, he's started doing some vlogging too -- video blogging -- and now he's taken to uploading some audio musings as well, which he calls "Fright Radio (http://grimlockmanor.blogspot.com/2011/03/fight-radio.html)." It's all entertaining stuff and shows that despite apparently having a real job he still has too much time on his hands.

What else can explain his willingness to out himself and volunteer to bring his latex Cat Woman suit to the next get-together?

But really, it is good writing, video, and audio. Just in case someone else might be interested in following along I figured I'd mention it since he's probably too modest to tout his own site. Too modest for that, but not too modest to play the submissive role for Irene. We are bringing video cameras to the next meeting right?

Nice work, FrightGuy. Just don't stand so close to me at the next meeting. :)

Rich

[niblique71]

Since we have no fear of going off topic on these threads, I thought I'd give a shout out to FrightGuy for some innovative stuff he's doing on his blog, Grimlock Manor (http://grimlockmanor.blogspot.com/).

I've been following his blog since he crashed the last M&T and -- horrors! -- fit right in, and I think he's doing some innovative stuff over there. In addition to regular blogging, he's started doing some vlogging too -- video blogging -- and now he's taken to uploading some audio musings as well, which he calls "Fright Radio (http://grimlockmanor.blogspot.com/2011/03/fight-radio.html)." It's all entertaining stuff and shows that despite apparently having a real job he still has too much time on his hands.

What else can explain his willingness to out himself and volunteer to bring his latex Cat Woman suit to the next get-together?

But really, it is good writing, video, and audio. Just in case someone else might be interested in following along I figured I'd mention it since he's probably too modest to tout his own site. Too modest for that, but not too modest to play the submissive role for Irene. We are bringing video cameras to the next meeting right?

Nice work, FrightGuy. Just don't stand so close to me at the next meeting. :)

Rich

Apparently there is NO fear of ANYTHING in our group!!! Patty isn't afraid we'll burn her house down. Noah ISN"T afraid to ride on the roof! Rich Isn't afraid to drive home under questionable circumstances.... At VERY High speeds, With a Humanoid shaped Body bag in the back of his truck.... Strapped to a Chair.... and then get Gas... All in a Days work. Hmmmmm I LOVE our group......

[GhoulishCop]

GC if you had to be in your birthday suit and it involved beer you would be there! I will also have to pass this Saturday on the Zombie Crawl. I just scored a toilet and a sink and have to find room for it, so I will be re-organizing my whole basement to make room. :) Now I have to think of some cool things to do with the toilet. I already have an idea for the sink.

Hey Sharon,

I was just reading back through this thread and noticed you had a toilet you were looking to do something with. You may have already seen this, but Terror Syndicate has a bathroom scene where they use a toilet:

http://terrorsyndicate.com/DarkWorks_2010_gallery.html

The photos dealing with the scene start at Pic No. 39 but you can get a better view at 40 where the puker is. Nice grimy scene. Don't know if you care to build your own puker but that would be cool.

Alternatively, you could roll a few six-packs of beer to me, I'll shotgun 'em, and provide a live demonstration for your guests. Either or.

Cheers,
Rich

[Joiseygal]

Hey Sharon,

I was just reading back through this thread and noticed you had a toilet you were looking to do something with. You may have already seen this, but Terror Syndicate has a bathroom scene where they use a toilet:

http://terrorsyndicate.com/DarkWorks_2010_gallery.html

The photos dealing with the scene start at Pic No. 39 but you can get a better view at 40 where the puker is. Nice grimy scene. Don't know if you care to build your own puker but that would be cool.

Alternatively, you could roll a few six-packs of beer to me, I'll shotgun 'em, and provide a live demonstration for your guests. Either or.

Cheers,
Rich

Actually I haven't seen those pictures! That is definitely very cool! I've got ideas from other haunts and pictures on the net, but I want to see if I can change it up a bit. Most likely I will go that route because it looks really gross! Thanks for the heads up and of course I would love to use you for my haunt...Remember free beer if you did volunteer! I would even throw in Sweet Ice Tea Vodka for you! :)

[sharpobject]

Hey Sharon,

Alternatively, you could roll a few six-packs of beer to me, I'll shotgun 'em, and provide a live demonstration for your guests. Either or.



Rich is great the way he is always right there to help out a fellow haunter.....

[FRIGHTGUY]

Hey guys and ghouls..so are we confirmed for the Saturday the 26th? I just want to be 100% sure because I'm either celebrating my mothers Bday on the 26th or 27th but want to lock down a date so I know I can make the make and take.

[Joiseygal]

Yep Saturday the 26th is the official date! Sorry for all the confusion this time around!

[trishaanne]

Yeah, the 26th....starting time around 10ish? We're not usually this messed up with dates. We can all blame Sharon for this one..:D

[Vlad]

Speaking of which, Sharon says if we have it on Saturday she has to leave early. so are we still on for Sunday?

[FRIGHTGUY]

No problem, I just want to make sure I can attend and join in the madnes..i mean fun!

[trishaanne]

Ken, will you PLEASE will you PLEASE quit trying to confuse everyone!!!!!
We are meeting Saturday the 26th! Sheesh....how did this get so difficult? lol. JayLite...are you bringing your wife this time?

[Vlad]

heeheehee

[FRIGHTGUY]

Yeah she wants to come. She teaches art classes on the weekends at a ymca near us so she has to see if they are holding a class that day first. If anything she might come late.

[Joiseygal]

Speaking of which, Sharon says if we have it on Saturday she has to leave early. so are we still on for Sunday?

So wait is it Sunday now????? I'm so confused! Why don't we just sleep over Pattie's house and that will solve the problem! :)

[trishaanne]

YOU'RE NOT SCARING ME!!!!!!!!! Come over on Friday and stay till Sunday...I don't care. We'll make room for sleeping bags, air mattresses, tents, etc. I'll even feed you, kind of, but since I may have to have a party this year it won't be alot cause I need to save up for that..lol.

As for the meeting....one last time....
SHARON....READ MY LIPS......WE ARE MEETING ON SATURDAY!!!!!! :googly:

[GhoulishCop]

So, if I have the chronology down, we were going to have the meeting on Saturday the 26th, but because Sharon couldn't come we moved it to Sunday the 27th. But then Sharon said she couldn't make it on the 27th so we moved it to the 26th so she could come.

Now that we're back to having it on the 26th, Sharon's leaving early anyway! But Patti's inviting everyone down on Friday the 25th so that we can all stay until Sunday the 27th?!?

Alrighty then!

Rich

[grimghost]

Please let me know what is the final date for the Make And Take? I can make Sunday, but not Saturday.

thanks

Grim Ghost

[hpropman]

So, if I have the chronology down, we were going to have the meeting on Saturday the 26th, but because Sharon couldn't come we moved it to Sunday the 27th. But then Sharon said she couldn't make it on the 27th so we moved it to the 26th so she could come.

Now that we're back to having it on the 26th, Sharon's leaving early anyway! But Patti's inviting everyone down on Friday the 25th so that we can all stay until Sunday the 27th?!?

Alrighty then!

Rich

Well now that we got that straight. :D I think that I will be bringing zucchini pie.

[DoomBuddy]

Crystal Clear. is it still in March?

[FRIGHTGUY]

So this make and take is on septembuary 47th at 2am right?

[FRIGHTGUY]

Everyone here like chili? Ill make a big batch..

[GhoulishCop]

Everyone here like chili? Ill make a big batch..

Chili makes an awesome Fall dish! Can't wait to have it at our March meeting in September! After all, we did have a Christmas party in February.

Rich

And yes, I eat big, heaping bowls of the stuff, as is painfully obvious by looking at me.

[trishaanne]

STOP IT! All of you! It will confuse Sharon! Good thing I love you guys, and that you make me laugh! People have no idea what it's like dealing with you guys every month...LOL.

[FRIGHTGUY]

NoahFentz, not sure if you saw it but Steve from Steve's Haunted Yard used your Skull Mold tutorial to do some skull casts. He shouts you out on his latest video Vlog..check it out...

http://www.youtube.com/user/YARDHAUNTER5#p/u/6/EROPtvRd8hE

[NoahFentz]

WOW!! Very Kewl!! Thanks for pointing that out!! It was quite entertaining....I can asure you waiting for latex to dry is boring....

This was my very first project when I joined this group. Thanks Vlad and BlackCat!!

[FRIGHTGUY]

Yeah it looks long and tedious but if you can go ahead and make a ton of skulls for little to no money than that is great. Do those molds usually last long? I have never made one but want to this year. I am experimenting with Friendly Plastic right now, they are small plastic beads that you can melt in the microwave then shape and they dry hard and clear. I am sure there are some sex jokes in that whole paragraph haha! Anyways..the friendly plastic seems to be a pretty cool sculpting material.

[GhoulishCop]

NoahFentz,

"I can asure you waiting for latex to dry is boring...."

I noticed in the video a hair dryer/heat gun was used to speed up the process (as well as only 6 layers of latex/gauze instead of the recommended 8-10). IIRC, Vlad has previously said heat should not be used to speed up the drying process and when we had our play date the other day, I recall you saying it's a week-long process because of drying time.

Will that be a problem later on for Steve's mold? Only because I'm kinda impatient myself and want everything to be done yesterday.

Rich

[NoahFentz]

Did you watch the whole video or scim thru it? The first attempt was an epic fail and he showed what it looked like. His second attempt was still too thin. When he pours the plaster in that mold it will sink and make a squashy skull with a flat head. It should be thick enough to support itself. He was peeling that mold off the skull like a banana (no comments)...it should "pop" out when the layers are pulled back...

Dont get me wrong....the video is quite entertaining and like all haunters its mostly trial and error until you get it the way you want it.

[FRIGHTGUY]

So with a proper application and ample drying time how long do these molds last, can you only do so many casts with them until they are no good? I might give it a try soon.

[GhoulishCop]

Since this has now become the mold-making thread (love the way this new guy FrightGuy keeps taking us off on tangents!), how expensive is this stuff? I thought I had heard around $8 for one of those 16 oz. Mold Builder latex containers, but AC Moore and Michael's were charging $15 and $16, respectively, for that size.

I know all of you old timers have done this mold making before at a meeting, but I'm thinking there might be enough interest to do another one at a future M&T (if you count two votes, FrightGuy and myself, as "enough interest").

Since the dry time on the latex is apparently glacial, maybe we could use a smidgen of time at the next meeting to start a mold project with the balance of the project finished at home afterwards.

Hey! Somewhere on this thread Greg was trying to nudge us to think about the April meeting before March was like 3 days old, so maybe this could be half the April project (or less) with another project chosen to fill in the balance of the day. And if I recall correctly, there had been talk of life castings and nailing straws in my nose and such...

If I also remember rightly, Irene suggested she was some sort of dominatrix.

Rich

[NoahFentz]

So with a proper application and ample drying time how long do these molds last, can you only do so many casts with them until they are no good? I might give it a try soon.

Let's see....I made my molds in 2007. I just demoed a plaster skull for Ghoulishcop this past weekend....cant tell you how many hundreds of skulls I made in the past but the molds last for awhile....

We actually have done this project twice since I've been going to this group. Third times the charm....I think it might have been BoB C that had an interest in doing 2 part foam mold. It would be cool to get him to do a demo on that process...

...so our next meeting will be the entire month of April....right?

[FRIGHTGUY]

SHould we start a new thread on this subject? One thing im wondering is what other kinds of setups could you use in these molds for example, great stuff, silicone, friendly plastic? Each is obviously more expensive but all have different looks and applications. If u did one usimg friendly plastic you would get a cool looking cleat skull but I dont know if it would release the same.

[FRIGHTGUY]

I meant clear skull..sorry

[trishaanne]

Oh great, like you guys NEED an excuse to go off track! Anyway, I'm thinking that 20 haunters with open containers of latex ought to make the buzz of the jello shots obsolete! That's almost as good as everyone burning styrofoam in the house with the windows closed (yeah, I know, our group has never been known for having many functioning brain cells!)

The containers of latex at Michaels and AC Moore are around 15 bucks, but if you look in the Sunday newspapers, there are always 40% off coupons.

Oh, and BTW...I thought our project for April was mailboxes, or rather, Rich making us all mailboxes!!!!!

[niblique71]

SHould we start a new thread on this subject? One thing im wondering is what other kinds of setups could you use in these molds for example, great stuff, silicone, friendly plastic? Each is obviously more expensive but all have different looks and applications. If u did one usimg friendly plastic you would get a cool looking cleat skull but I dont know if it would release the same.

Start a NEW Thread??? We can't even kill the thread from December! Speaking of Mold's That thead HAS Mould! LOLOL.

I'd be on board with making a full (With Jaw) Skull mold, and a group buy for two-part foam to make BILLIONS of Creepy skulls. We'll use them to insulate Patty's House by gluing them to the siding at 4am. We'll also be storing at least 670,000 of them in her garage. We'll also be having them for dinner that night :).... MmMmmMmmmmM Crunchy.

[Joiseygal]

So when is the meeting Saturday or Sunday? Hey Pattie what was that you were saying about brain cells?
Dr. Kreepy did a good tutorial on skull molds also. I did a Great Stuff prop how to a few years back that you might want to check out Frightguy. The only thing the Great Stuff doesn't give as good of detail.
http://www.hauntforum.com/showthread.php?t=17204

[Vlad]

Chili makes an awesome Fall dish! Can't wait to have it at our March meeting in September!

So it's official that we're not meeting this month?

[GhoulishCop]

Vlad,

"So it's official that we're not meeting this month?"

Nah! We're having the November, 2009 meeting on the 26th.

Rich

[FRIGHTGUY]

Im going to camp out at Patties starting now that way whenever the meeting starts on whichever day ill be there ready to go..i guess im going to have to make enough chili to last me since i could be camped.out for months!

[Joiseygal]

YUM CHILLI!!!! I hope I can get out of this previous engagement so I can try some of Jay's chilli! Otherwise I will be missing out on my favorite part of the Make and Take...the eating part!

[GhoulishCop]

Chili, zucchini pie, and cake! We be feastin' come the 26th! And, of course, copious amounts of beer to wash it all down and lower my inhibitions, thus allowing me to make inappropriate comments and hit on all the ladies. And I use that term loosely.

Rich

[grimghost]

OK... I am still a confused ghost (its what I get for passing away in the 16th century).
I can only make Sunday. Is it worth it to come or will you guys just be wrapping up and hanging out. niblique71, I have the $10.00 for one of the deer motors we discussed earlier back in February, if they have not all been spoken for. I apologize, but thinks are a little tight this month so I have not been able to paypal it to you earlier.

thk
GrimGhost

[trishaanne]

GrimGhost....contrary to what this group of goofballs is talking about, the meeting is on SATURDAY!!!! SATURDAY, SATURDAY, SATURDAY. SATURDAY, SATURDAY, SATURDAY, SATURDAY!!!

Trying to know when they are joking around and when they are serious takes a bit of getting used to. Sorry for any confusion they may have caused you!

[niblique71]

OK... I am still a confused ghost (its what I get for passing away in the 16th century).
I can only make Sunday. Is it worth it to come or will you guys just be wrapping up and hanging out. niblique71, I have the $10.00 for one of the deer motors we discussed earlier back in February, if they have not all been spoken for. I apologize, but thinks are a little tight this month so I have not been able to paypal it to you earlier.

thk
GrimGhost

If you think this thread is confusing?? Try watching us all try to make something together. It's total chaos, but somehow it always get's done before dinner. We always Love those monkey brains, and snake entrails, goats feet, and Eye of newt soup... For dessert we usully serve up some fresh fingers from the days build.

As far as your Deer Motor? I "Should" still have one for you. But, it looks like you won't be able to make it to our meeting which "IS" on Saturday march 26th. You could always pick it up at our April meeting, and who knows when THAT will be??

[trishaanne]

I thought the April meeting was already scheduled for September! (See, I can play yoo...:p)

[Joiseygal]

I can only stay until 5pm because I can't get out of the previous engagement! :( I'm bummed, but at least I can make it to the meeting!

[Vlad]

So we're starting at 5 PM ????

[Joiseygal]

So we're starting at 5 PM ????

LOL...Can we figure out who the biggest trouble maker of the group is?????

[sharpobject]

Not to cause any trouble, but I'd really love to have a weekend make and take at my house in May. Ralph's work contract runs out in May and after that I could be living in Florida - so I'd like to get it in before that. (it wouldn't be fair to the new homeowners to have it after we move) So make sure you check your calendars and bring a list of potential dates with you next Saturday so we can talk about it. I'd be nice if EVERYONE could come this time.

[Joiseygal]

OHHHHHHHHHHHH BABY Yessssss!!!!! I am out of my previous engagement and I can stay for the entire meeting! I am so happy!! Oh ummm...well I guess it would be kind of cool to spend the entire evening with you guys. :) No it would be awesome! Oh and Elaine I will have to find out what dates are good in May. I would love to stay for a weekend!

[trishaanne]

FYI....we just came back from the firehouse and have booked it for a belated Halloween party on November 12. If we don't change our mind, and if I can find some money to pay for this thing, that's the date!!!!!

[Joiseygal]

FYI....we just came back from the firehouse and have booked it for a belated Halloween party on November 12. If we don't change our mind, and if I can find some money to pay for this thing, that's the date!!!!!

Wow this night is getting better and better!!!!! That is great!

[NoahFentz]

Hey everybody...we plan to finish the renovation on our house (including the outside) sometime in late septmeber 2013. We want to have a big house warming party...Save the date!!

[GhoulishCop]

Sharon,

"Can we figure out who the biggest trouble maker of the group is?????"

Um, since it's been YOUR schedule we've been working around and trying to accommodate, and which has led to innumerable tangents here, I'm willing to vote that it's YOU who's the biggest troublemaker. At least this month.

Oh, and look! Now you're going to be here for the whole meeting anyway. Hmph.

Rich

[Vlad]

So now the make and take isn't until Nov. 12th ????????????

[Joiseygal]

So now the make and take isn't until Nov. 12th ????????????
I believe Nov. 12 th, 2013??? I hope Jay brings a truck load of that chilli because he will be camped out at Pattie's house for a long time!

[GhoulishCop]

Sharon,

"OHHHHHHHHHHHH BABY Yessssss!!!!!"

You know, there's only a few places I'm used to a women yelling like this, and a Halloween M&T group typically isn't one of them. Of course, I wasn't around for the whole laundry room incident, but may haunting is that good.

Rich

[madmomma]

Looks like I lost something along the way in the last several posts... if I understand what Vlad is saying, the next meeting is at Sharon's new house that Elaine sold in Florida on November 12, 2013 which is being remodeled by Jeff? Do I have it right?
I just think all you guys should just start your own Halloween Comedy Central show on TV. It would much better than anything out there now.

[trishaanne]

NOOOOO...not you too Mary!!! You were my last hope of any normalcy in this group..lol.

[GhoulishCop]

Greg,

Looking for some clarification on the grave grabber motor before I start gutting my reindeer. You said the auto-reverse function of the reindeer motor ended up having problems after running for extended periods of time. So would that mean that the motors we got last year with the crank ghost build would be an acceptable alternative? Is there a need to have an auto reverse on this? What was the benefit of that anyway as opposed to just having it run in the same direction over and over? Thanks!

Rich

[niblique71]

Greg,

Looking for some clarification on the grave grabber motor before I start gutting my reindeer. You said the auto-reverse function of the reindeer motor ended up having problems after running for extended periods of time. So would that mean that the motors we got last year with the crank ghost build would be an acceptable alternative? Is there a need to have an auto reverse on this? What was the benefit of that anyway as opposed to just having it run in the same direction over and over? Thanks!

Rich

Rich, You can easily adapt a "Vent" motor for this design. They are strong enough (I think) to do the Job.

However, there are a few advantages to using the Reindeer motor.

The reindeer motor is:
- WAY quieter
- Fully weatherproof (Sealed in fact, the Vent motor is Not)
- A little stronger
- The mechanism is designed (dimensions) for the reindeer motor
- It will auto-reverse as a safty mechanism if there's a snag.

Feel free to bring a vent motor and we'll make the necessary adaptations. GO ahead and build a crank arm for it and we can adapt the rest.

As for your second question:

The original design had VERY Unique movement compared to a Tombstone peeper, or similar prop. This movement was created originally by using the auto-reversing capabilities of the deer motor. I just redesigned the movement by adding an extra crank arm to simulate the original movement while using 360 degree motor rotation. This created a bulletproof prop with many future years of heavy use.

Greg

[FRIGHTGUY]

Hey Greg,

I think you posted this in another thread but where can you purchase the deers motors from? I have the two that I got from you our last meeting but I am thinking of other props that can be made with them so I may want to purchase more in the future. Also has anyone used those Mirror Ball motors for any props other than an FCG? I have one sitting at home I am looking to put to use but haven't had any ideas for it yet...anyone have any ideas?

[niblique71]

Hey Greg,

I think you posted this in another thread but where can you purchase the deers motors from? I have the two that I got from you our last meeting but I am thinking of other props that can be made with them so I may want to purchase more in the future. Also has anyone used those Mirror Ball motors for any props other than an FCG? I have one sitting at home I am looking to put to use but haven't had any ideas for it yet...anyone have any ideas?

I would recomend waiting to see if we can get another group buy together. When you buy 9 or more the shipping is free which seriously reduces the cost of the motors.

[EMU]

Hey Guys! Longtime member from Long Island NY. I Have some exciting news! My boyfriend currently lives in Hackensack, and we're moving in together in July! So, If I can weasel my way into the clan you guys got goin' on here, I'd love to attend soon! :)

[Vlad]

Hi Emu. All are welcome.

Looks like I lost something along the way in the last several posts... if I understand what Vlad is saying, the next meeting is at Sharon's new house that Elaine sold in Florida on November 12, 2013 which is being remodeled by Jeff? Do I have it right?

Now that's funny!

[Vlad]

I'm not certain that the deer motors are stronger than the vent motors. I can't see them moving the FCGs, but Greg is right, they're not weather sealed.

[Dead Center]

Ummm I dont have a 2013 calander yet but can some one remind me of the Florida weekend holloween November party this weekend starting on Sunday at 5pm. I think I got it all. I'll be there with a beano six pack to share.:googly:

[trishaanne]

EMU, after reading through all this chaos as you SURE you want to join in? lol As Vlad said though, all are welcome!

[GhoulishCop]

Hey EMU,

Great to have another body lying around. Hackensack, huh? I live in Teaneck and NoahFentz lives in Maywood. We normally carpool in my two-seater pickup (truckpool?), and three might be a tight squeeze, but there have been discussions of tying Noah to the hood.

Maybe we can come up with a way we can all drive to the M&T's together -- after all we have been known to transport a corpse or two around back in the bed.

Regardless, look forward to meeting you soon.

Rich

Looks like I'm going to need a bigger truck soon

[EMU]

Hey EMU,

Great to have another body lying around. Hackensack, huh? I live in Teaneck and NoahFentz lives in Maywood. We normally carpool in my two-seater pickup (truckpool?), and three might be a tight squeeze, but there have been discussions of tying Noah to the hood.

Maybe we can come up with a way we can all drive to the M&T's together -- after all we have been known to transport a corpse or two around back in the bed.

Regardless, look forward to meeting you soon.

Rich

Looks like I'm going to need a bigger truck soon


SOOOO COOL! Haha, Well, my Jeeps' engine just seized BUT, when and if I get a new truck I can drive you guys instead of playing sardines! I promise, my driving isn't that bad... (If it was I'd have more props!)

I am looking forward to meeting you all! May be a little bit before I can, but I want to stick my nose in early, make sure I wont feel COMPLETELY like an outsider when I do go! :)

[niblique71]

Well Not all are equally welcome. I'm only welcome if I bring my corps-O-Matic burger machine. We love Hand-burgers and finger dogs for dinner ;) Noah Carves the buns out of pink foam. They're a little crunchy, but tasty nontheless.

[Joiseygal]

Hey Emu! How are you? I use to chat with you on the forum awhile back. Anyway welcome the NJ/PA/NY make and take. :) Oh and your driving can't be any worse than Rich because I heard he is a lunatic!
Looking forward to the meeting, but trying to figure out when I will find time to make the head and hands. If I don't make it in time for the meeting I can still add them after the project..right? Also Greg you said you have my parts that I just have to give you the 10 dollars for it? Remember I don't need the motor. Thanks!

[niblique71]

Here's a partial tool list for everyone who has them to bring. There should be enough tools for everyone. I might update this before Friday so check back. I got a little busy with work in the last two weeks.


For Rich and Ken: Bring your Miter saw and Vises and a grinder with a cut off wheel. An extra sawzall would be helpful.

For Jeff and Karen: Bring your latex and your burlap

I will be bringing one Vise, One Miter saw, and a mini Drill press and a LOT of other tools.

For everyone else, bring:
Hammer
Power drill (if you have one)
Drill bits
Assorted driver bits for the drill
Wrenchs or adjustable wrench
Allen wrenches (If you have them)
Hot Glue gun and Glue sticks
Plyers (assorted)
Tape Measure
Marker or pencil
Sandpaper or file
scissors
Small socket set (Not metric)


Don't forget to check the parts list on the first page of this thread for items you should buy/bring this weekend (Which is apparently bluecember 36th 2013)

[niblique71]

Yes I have (or will have) most of the other materials for this build as I specified in the first post in this thread. It was updated a few weeks ago if you haven't reviewed it in a few weeks. The most critical thing for everyone to buy is the 3/16th" X 3' long round rod (non threaded) from Lowes or Home depot. The cost for the other materials that I will be providing is $10 each. For those that haven't purchased a deer motor yet, they are also $10 ea.

Some of you want to try to build one using the "vent" motor. With a few changes in measurements, we can make it work.

[trishaanne]

Turns out that with all the stuff going on around here, I'm not going to be building this after all. I will, however, be working on projects for the party because I'll have inspiration. What better time to work on stuff for freaky people than when the freaky people are here!!!11

[niblique71]

Only 2 days left till our gathering. The lack of activity and questions at this late hour is either very comforting or very disconcerting. We'll find out this Saturday.

Oh, and it's supposed to be a whopping 38 degrees on Saturday, so bring your bearskins.... Wait??? Did I say BARE YOUR SKIN??? Hmmmmm Polar Club here we come.

[trishaanne]

I'm really trying to make room to work inside...somewhere! However, if that doesn't work because my schedule is ridiculous right now, than we can put the carport cover up and fire up the firepit while working outside and come in to warm up. Checking in to a storage facility this weekend to start emptying the garage and then we can hang out in there next month when Rich is making us all mailboxes!!! Anyway, we always find a way to make it work and with a little luck the weather will be breaking SOON! I'm thinking we MAY be able to do most of the work inside and just the cutting and stuff outside! I'll be working on party stuff and not on this build, so all I need is a little corner of a table, or even the folding trays..lol.

[niblique71]

Just a reminder to everyone who is building a grabber this weekend to get your Stuff.

3/16th X 3' round rod,
some scrap 2X4's and 2X8's.
foam skull
white bic pen (thin wall)
spray paint (Black or brown?)
Burlap (Noah, are you bringing the burlap??)
Hot Glue gun and Glue sticks
Various tools.

If your planning on making a hand for your grabber you will need:
Paint for your hand (black? Brown? White? Red?)
cotten balls
Latex (Black Cat is supposed to be bringing that I think)
Cheapo Paint brushes for latex and paint

I'll be providing everything else.

We are in need of work tables for this build. If anyone has a table or two BRING IT. I'll be bringing One to hold power tools and the Vise.

Rich, Are you bringing Your Miter saw too?? Grinder??

Ken, You're bringing an extension Chord and the other Vise?

I'll check in tomorrow to answer any last minute questions

[NoahFentz]

burlap...check
I'm low on latex...I think I will be going to AC Moore on Friday to get a small container....I checked and some of my older jars are dried out. At one point in the future a latex run will be needed...

I'll be working on a wighead I started...another creepy family member...Dont know what I'm bringing food wise....probably wont be a dessert....

[FRIGHTGUY]

I also have burlap I will bring and seeing how it will be nice and cold I think the chili will do nicely to warm everyone up! Can't wait!

[FRIGHTGUY]

Starting at 10am correct?

[trishaanne]

As far as I know, yes, it's around 10 AM. DRESS WARM...my day is SO crazy tomorrow that I don't know how much time I'll have to clear much of a work space. I'll do my best but the kitchen guys are coming tomorrow to measure for the cabinets and we have a wedding tomorrow night. I'll see what I can do, although it would be MUCH easier to get stuff done if Kenny went to work tomorrow and gave me some free time with noone here to "help"

[GhoulishCop]

Greg,

Yes, I'll be bringing an assortment of tools. Previously you mentioned a Sawz-All or two. I'll bring that as well. We helping Pattie remodel her house? What the heck are we building with a Sawz-All?! It was a pretty dainty looking prop in the video...

Rich

[trishaanne]

Actually...we're getting ready to remove the cabinets and counters in the kitchen so if you should get bored...:p On second thought, I'll do it myself. I do still need to have exterior walls and electricity in here..lol.

[niblique71]

Greg,

Yes, I'll be bringing an assortment of tools. Previously you mentioned a Sawz-All or two. I'll bring that as well. We helping Pattie remodel her house? What the heck are we building with a Sawz-All?! It was a pretty dainty looking prop in the video...

Rich

The Sawzall is just a second alternative to cut metal and a few other things. Just covering all the bases.

[FRIGHTGUY]

Looking forward to seeing everyone tomorrow and cant wait to have this grave grabbet prop in the books! Ill be bringing my wiper motor with me, maybe one of you guys can help me with how to set it up.

[Joiseygal]

I will be bringing a food item from Walmart! :) I'm not sure what yet, but I might be going today, so I will post what I'm bringing tonight. You know all the work I do preparing for my food item....Geeze what I do for this group! :)

[trishaanne]

LOL...well Sharon, you ARE a gourmet chef!!! Not sure what I'm making yet...I'll have to see how much money I can come up with between now and then. Maybe I'll win the lottery tonight and the menu will be amped up to filet mignon and lobster ....lol.

[sharpobject]

I have no idea what food item I will be bringing. It looks like it's ending up to be a "surprise" buffet. That should be fun.

We'll try to leave early enough to get there for 10am - but no promises. Irene can't make it this time. Their dog had 8 puppies and the mom is being fussy - so they need 24 hour care at this point and she can't get away.

[Black Cat]

Trying to gather up the tools and parts needed. I should have latex but it's buried and I'm searching.
I have a bag of cotton balls. As for food I have no idea.
Looking forward to seeing everyone.

[madmomma]

Sorry guys, but I won't be able to join you tomorrow. I'm behind on lots of homework for my computer tech class because of program problems that I'm trying to fix and need to work on it through the weekend because it's due Tuesday.:(

I'm really disappointed because I wanted to see how the grabber goes together but since I think I have most of the supplies already, I'll check out the tutorials or comments on the forum to help. I'm definintely going to make it, it's just a matter of when. Luckily I have my handy nephew working on our house who has lots of cool tools and skill to help me if I get stuck. Please don't have too much fun without me (yeah, right) and good luck.

Looking forward to seeing some pictures and hearing some stories! Go Grabbers Go! I'll be back:eek:

[Joiseygal]

Madmomma sorry you will not be able to make it! :(

Ok I just got back from Shoprite and I purchased a huge pepperoni pizza. So that is what I will be bringing to the Make and Take! If you don't like pepperoni than you can just peel it off and throw it at your nearest haunter! I'm sure Pattie wouldn't mind much if we started a food fight!

[FRIGHTGUY]

The Chili is all cooked and ready to go! I do warn you it has a little kick to it so sensitive stomachs beware!

I have a lot of burlap I will also be bringing with me, some cheese cloth and creepy cloth. I wasn't able to get any mold maker latex but I do have a lot of cotton balls and coat hangers which I assume you could use the wire from to make the hands?

Looking forward to it..oh and my wife "Frightgirl" will be attending as well!

[Joiseygal]

I love Chili with a kick, but it doesn't like me! I will still eat it anyway! I just got the car loaded with almost everything including my old hag costume. I want to see if someone can take video while I am in the costume. Anyway looking forward to seeing everyone and I'm glad your wife will be joining you Frightguy! GOOD NIGHT ALL! :)

[diggerc]

As long as the alarm clock works i'll be there in the AM

[GhoulishCop]

Morning all,

I'll be bringing my usual assortment of tools today, per Greg's request: miter saw, grinder, drill, Sawz-All, wrecking ball, etc. I think I remember Pattie saying she wanted her kitchen remodeled and a rear wall taken out.

I have a small, new container of latex adhesive I bought when I was looking for the modeling latex (I'm so very silly), so if anyone needs or wants it they can use it and/or have it. I've never been able to get into using latex for corpsing preferring instead to use my "pancake batter" recipe so I doubt I'll ever have need for it (of course, immediately after giving it away I'll find a use for it!).

Jay, I'll be bringing my collection of Terror Syndicate books as well (plus the video).

Also, if anyone's interested, a local Freecycler is offering several church pews. There are several sections at 4-ft. and one or two at 9-ft. They're made of oak and look to be in very good condition. They include the seat and back (connected) and separate center supports (they look like an L-shaped piece that would fit under the bench). The only part that's missing is the end piece, which could "easily" be built out of plywood or some hardwood if you were looking to incorporate a church scene into your haunt. They'd also be sweet as-is if you were simply looking for some built-in seating too.

He actually had a complete pew at his house as well, but he said that was his brother's who didn't want to part with it. I noticed a few other decorative pieces that also came from a church (not sure if he's parting with those as well), but they were easily 10-ft long. I could ask, if anyone's interested.

Anyway, the point being, if anyone is interested in the pews, I would pick them up for you and transport them to you another day. Only thing is, you would have to be sure you wanted them because I would not have room for storage. However, I do think Pattie has some space in her garage where they would fit nicely! :p

Last, I'll be picking up Jeff at around 9 or a little before so we'll be down around 10, depending on how fast I can get the chariot to drive. We've caught up with all the gossip between each other so I can return to my white-knuckle driving ways again.

Rich

[NoahFentz]

Okay....seven layer dip and I'm bringin a dozen bagels for the morning folk....

a little before 9.....ugh....

[trishaanne]

Just suck it up Jeff. Sheesh....at least you can sleep until he gets there. I have people GETTING HERE around 8:30!!! Plus, as of now (8:29), I have absolutely no idea where everyone is going to work, as my house is completely turned upside down right now. Getting ready to scramble to make room. Kinda cold right now to be outside, but if all the cutting is done outside, I'm guessing assembly can be up here.

[FRIGHTGUY]

I'll bring my DC prop book Rich..doubt you will see this since your probably on the road. Just waiting for Frightgirl to get ready and we will be on our way!

[FRIGHTGUY]

sitting in awful traffic on parkway..ugg

[trishaanne]

Wow....by 8:45 the house was cleaned back up, dishes were done, chairs were back downstairs and furniture was all put back in place. And I STILL got my down time since Kenny's not home yet. It was so nice seeing everyone again. Sorry it was so cold (not that I can control that) and also that I have no place yet for everyone to work inside. The garage will start being emptied into storage soon but it will take a little time. I'm praying the weather starts to break soon..lol.

Jay, please tell Carolyn how nice it was to meet her. I'm glad she joined you. I hope everyone had a safe trip back home. Can't wait to do it again..maybe I'll have made some progress on these stupid invitations so I can get some opinions.

[NoahFentz]

YAY!! Another great Make and Take!! Sorry that I was a little anti social but I got done what I wanted to do....as soon as I add hair to the wighead I will be posting a How to on my website....It was great to see that everybody pretty much got their prop done in one day. Congratualtions!! Thank you Trishaanne and BooBooBunny for letting us use your cold driveway and warm house...Food was great and thanks for the Birthday Cake!!Nice meeting you FrightGirl...Thank you once again GhoulishCop for the ride...Hope everyone had fun!!

Hey JoiseyGal
Here is the idea I had with that block of styrofoam...
http://www.halloweenhouse.org/lfence4.JPG

His name is ToyGuy and his website is www.halloweenhouse.org
He use to have a how to on the Pillars of Pain but it looks like its no longer there...

[Joiseygal]

Thank you so much Pattie and Kenny! It was definitely cold, but we were all able to complete our grave grabbers (some slowers than others). Thank you Greg for coming up with the parts and organizing the whole project. I didn't really get a chance to enjoy what I made at the time because I had one agenda and that was to get warm! When I got home I showed my daughter and was really happy with the results. It was very nice to meet Frightgirl. :) I hope we see her again at another meeting. Thank you for all the people who helped me work on my project and you know who you are! Last, but not least thank you so much for the most awesome compressor from Ken! I can't thank you enough!!!!

http://www.halloweenhouse.org/lfence4.JPG
Very cool Jeff! That will be a project I will be working on this year. I know it will take some time, so hopefully I can finish it before Halloween. Also thank you Jeff and Rich for delivering the compressor. You guys are all awesome!

[FRIGHTGUY]

Hey everyone!

It was great seeing you all again yesterday! I am sitting here with Frighgirl (Carolynn) and she wanted to say thank you to everyone being so welcoming, she had a good time minus the cold weather. Thanks to Pattie & Kenny for being such great hosts again. Pattie I'm sorry your faith in me went down the drain but luckily there were no fires yesterday and you still have your house in one piece!

I had a great time doing the build and learned a lot from everyone! I just wanted to thank everyone for being so helpful and a big thanks to Greg for all the work he did putting this build together. It was great to go home with a fully working prop, Frightgirl and I are looking forward to making the hand for it and detailing it with fabric. It's going to look great in our cemetery!

I didn't get to take much (if any) video or pictures from yesterday so if anyone did I hope you post them on here or somewhere that we can take a peek. I would love to add a few to my blog if that is ok.

Looking forward to our next meeting which Rich is going to build us all completed Mailboxes! When is that meeting scheduled for? Some time in 2013? Plenty of time to build us all an awesome mail box Rich! lol!

Good times!

[GhoulishCop]

As you all know, I really taxed myself yesterday putting together the grave grabber prop. It is exhausting watching y'all work in the cold!

However, as much as I liked Greg's improved movement of the arm so that it didn't arc so much, there was still more of an arc than I would prefer. I want my hand to go straight out.

I did some searching today and while I found a couple of solutions, the one that I finally hit upon was simply lining up the deer motor with the PVC arm and using a small flat piece of metal bar to connect between the motor arm and the prop arm.

At the wrist end of the prop, I used two screw eyes. The prop seems to run fine and the arm moves straight out as I wanted. I'm just wondering is there a problem with this set-up, or is there a benefit to using Greg's multi-linked set-up? I'll post some pics and /or video I took of it in operation as soon as I figure out how to upload the video.

Rich

[niblique71]

As you all know, I really taxed myself yesterday putting together the grave grabber prop. It is exhausting watching y'all work in the cold!

However, as much as I liked Greg's improved movement of the arm so that it didn't arc so much, there was still more of an arc than I would prefer. I want my hand to go straight out.

I did some searching today and while I found a couple of solutions, the one that I finally hit upon was simply lining up the deer motor with the PVC arm and using a small flat piece of metal bar to connect between the motor arm and the prop arm.

At the wrist end of the prop, I used two screw eyes. The prop seems to run fine and the arm moves straight out as I wanted. I'm just wondering is there a problem with this set-up, or is there a benefit to using Greg's multi-linked set-up? I'll post some pics and /or video I took of it in operation as soon as I figure out how to upload the video.

Rich

That motion sounds exactly like Joes Vertical Grave peeper that he brought to the first meeting that I ever attended. The motion you are seeking is a far more common than the motion that is created by the grave grabber we made yesterday. Personal preference is always the guideline for any of our own props. Had you asked about achieving that motion I would have sent you to Joe. The mechanism is far easier to build that what we did yesterday (in terms of geometry). My build admittedly was highly relient on geometry, BUT the geometry of the OAGG was what makes the movement unique and a cool thing to build.

On a Side note, I'm (selfishly) dissapointed that you didn't build one with a vent motor. I would have loved to have seen how it performed. I suspect it would have worked just fine. If I knew that the deer motors had flaws with the "Auto-reverse" I would have suggested using the vent motors. By that time I had already bought 10 of 'em for the group.

[niblique71]

BTW, I had a Fantastic time yesterday. I was unaware that this was the first time that everyone who started, actually completed the basic prop. I'm elated to be part of this group and thier diversity of talents. Patty, As usual, THANK You for letting us invade your home and further irritate your neighbors who seemed totally undaunted by a 9' witch walking around your front lawn, and 15 people making constant noise for 8 hours. Sharon, Your Stalkaround was TOTALLY awesome!!!! Joe, thanks for handling the "neatening process" after our mayhem. The Food was AWESOME as usual.

Frightgirl, it was really nice to meet you, even though I was more than preoccupied.
It will be MUCH nicer once the weather get's warmer.

Sooooo, who's starting the next thread??? and what are we building??? I have a ton of suggestions, but it's someone elses turn to take the reigns. However, I'd love to demonstrate my hand making technique for the grabber. It's similar to other techniqes you done before with some subtle differences. It'd take about 2 hours from start to finish (less painting).

[NoahFentz]

Here are some pics from the xmas party and the last meeting....it seems that I take more but I guess not...

http://i248.photobucket.com/albums/gg177/NoahFentz-itsJeff/make%20and%20take/njpa007.jpg

http://i248.photobucket.com/albums/gg177/NoahFentz-itsJeff/make%20and%20take/njpa004.jpg

The rest of the pics....
make and take pictures by NoahFentz-itsJeff - Photobucket