HauntForum
 
 
 

Go Back   HauntForum > Props and Prop Building > Light and Sound
Forgot Password?

Notices

Light and Sound Forum for the discussion of the fine art adding light and sound to your haunt.



Reply
 
Thread Tools Display Modes
  #11  
Old 03-23-2017
Tanker Tanker is offline
Uneasy
 
Join Date: Mar 2017
Location: Syracuse, Ny
Posts: 27
Likes: 0
Liked 0 times in 0 posts
Default

Very nice! I bought the very pricey kit from hi rez. As I knew no better, I just wanted to build this project. I like your idea, came.out nice man. I never realized how much was involved in this while endeavor! If it wasn't freezing g I'd be in the garage working on it daily til complete. I am going to get the mixer. And the speaker.
I'm just curious as to how you hooked yours up, if u don't mind me asking.
Tha ks for the info man
Reply With Quote
  #12  
Old 03-23-2017
bikerglen bikerglen is offline
Frightened
 
Join Date: Jan 2017
Posts: 21
Likes: 1
Liked 6 times in 2 posts
Default

Hereís the Micro Mix inside my ZCU.

12V is connected to the power adapter that came with the mixer.

Input 1 is connected to the left audio from the main zombie video monitor headphone out.

Input 2 is connected to the left audio from the secondary screen video monitor headphone out.

Input 3 is connected to the right audio from the secondary screen video monitor headphone out.

Input 4 is left unconnected.

The single mono output is connected to the speaker.

I had to use a bunch of RCA to 1/4" mono phone plug adapters.

The right audio from the main zombie video monitor is, of course, connected to my DTMF relay decoder. Itís the red RCA connected to the adapter to the left of the mixer.

-Glen

Reply With Quote
  #13  
Old 03-24-2017
Tanker Tanker is offline
Uneasy
 
Join Date: Mar 2017
Location: Syracuse, Ny
Posts: 27
Likes: 0
Liked 0 times in 0 posts
Default

Awesome! I did order the mixer, I'll have to order some.more connectors, my issue is, I think that my black boxes from hi rez do not have a headphone out jack. I know I can use the headphone out on the main monitor, I do have 2 separate monitors, 1 is hdmi and the other is from hi rez, but again I may have to use coax... more work!! Hahaha. I truly appreciate the help man, saves me a ton of effort learning the wrong way. I will be buy the speaker setup as well, but for now I wana get the rest built and wired up. I can hook the setup to my stereo to make sure everything is set.

Im.currently working with rust paint for my control boxes.

I owe you a beer my friend!!!
Reply With Quote
  #14  
Old 03-24-2017
bikerglen bikerglen is offline
Frightened
 
Join Date: Jan 2017
Posts: 21
Likes: 1
Liked 6 times in 2 posts
Default

No problem. I donít have the hi-rez media players or their manuals but I suspect the AV jack is close enough to a headphone jack to work with the mixer. Thereís probably a setting somewhere to enable video on the HDMI jack while simultaneously outputting audio on the AV jack.
Reply With Quote
  #15  
Old 03-24-2017
bikerglen bikerglen is offline
Frightened
 
Join Date: Jan 2017
Posts: 21
Likes: 1
Liked 6 times in 2 posts
Default

Yep:

NEW 2015 MODEL FEATURES:
  • Ability to SWITCH Audio Output through RCA A/V Connections while using HDMI Video Output
Reply With Quote
  #16  
Old 03-24-2017
Tanker Tanker is offline
Uneasy
 
Join Date: Mar 2017
Location: Syracuse, Ny
Posts: 27
Likes: 0
Liked 0 times in 0 posts
Default

Ya I have to figure out all the connections and fun stuff..hahaha
Back to eBay to order a few more adaptors.
Thanks again man.. Anymore tips I'm all ears!!!
Reply With Quote
  #17  
Old 03-27-2017
Tanker Tanker is offline
Uneasy
 
Join Date: Mar 2017
Location: Syracuse, Ny
Posts: 27
Likes: 0
Liked 0 times in 0 posts
Default

My mixer and adaptors finally arrived... time to play
Reply With Quote
  #18  
Old 03-28-2017
bikerglen bikerglen is offline
Frightened
 
Join Date: Jan 2017
Posts: 21
Likes: 1
Liked 6 times in 2 posts
Default

Cool! Hope they meet your expectations!
Reply With Quote
  #19  
Old 03-29-2017
Tanker Tanker is offline
Uneasy
 
Join Date: Mar 2017
Location: Syracuse, Ny
Posts: 27
Likes: 0
Liked 0 times in 0 posts
Default

Oh I'm sure they will, I ran into another issue, so ended up taking the frame apart, it's too short.... Always something... Hahah, this weekend I will finally have the electronics together! Thanks again for the tips
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Black light suggestions Pumpkin5 Light and Sound 20 08-17-2014 03:16 AM
Ghost Make-Up Ideas: Need suggestions TheScary_Jackolantern Costumes and Makeup 7 10-04-2013 04:50 PM
Airbrush Compressor Suggestions spookymulder76 Finishing Touches 20 11-14-2012 03:43 PM
Camouflaged Speaker Housings Knight Wraith Prop How-To's 6 07-15-2011 12:25 PM
Paint suggestions daveo1101 General Prop Discussion 6 10-01-2007 10:38 PM



All times are GMT -4. The time now is 09:08 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
© 2004 - 2017 HauntForum.com | All rights reserved