Haunt Forum banner

1000 watt Fitco mega fogger and others

10939 Views 26 Replies 8 Participants Last post by  Vlad
I had the same problems that everyone else did with these piece of crap foggers:mad: , this is an email I sent to the manager at First Imperial Trading Company. This is the company that manufactures these products.....

I had purchased a 1000 watt mega fogger and a ground fogger from my local party city no more than a week ago. When I got the first one home I attempted to test it out. I filled up the resovoir with the fitco fog juice and let the machine run through its heating phase. When the machine was done heating up (the light turned on) I then turned on the remote for the machine and a nice high pressure burst of fog came out of the machine for about 3 minutes. After that the fogger went back into its reheating phase and when it was ready again I turned the remote back on and this time the fog did not come out. I unplugged the machine and let it cool down. The next day I attempted to retry the machine, I checked the fog juice to make sure there was enough in there and there was plenty. I let the machine heat up and then turned the remote on and no fog came out again. I exchanged that machine for a new one from party city thinking that it was a defective machine. The second machine did the same thing as the first. I am now on my third machine that is currently doing the same as the first two have been doing. As of right now, I am currently sure that it is a problem with the brand and not the indiviual machines. I am currently part of a halloween forum and there is about 8 other cases of this same behavior happening with your products. The ground fogger is also not working up to par. It is doing the same thing as the other fogger but instead of no fog coming out, there is a tiny bit but with no pressure. Party City is telling there customers that they will not take these foggers back so I am sure your company will find a way to keep happy customers, and to compensate the ones that are not to pleased at this moment.

The Manager's email is [email protected]

Please if you are having the same problems write him, see what we can do about this product! Since we all know Party City won't do anything:finger: . Overwelm his e-mail, lets kick this companies butt into gear!! :D

:xbones: Rebecca and Chris:xbones:
See less See more
1 - 5 of 27 Posts
One thing I know on these units.
They were new in the market 3 yrs ago. So, they've been setting in a warehouse for that long. Most just clog right out of the box at this point.
Simple cleaning will probably correct this.
A small wire it to the nozzle while operating (careful it's gonna be hot!)

I sold a ton of these when they were new, not so much now due to service issues....yah!
I try to have valuable input from time to time!? lol
Well, you could always drive it there yourself?
Ship it parcel post, it will take 3 extra days, but save on shipping.

And FYI, I've had a 1000wt FITCO for 3 yrs, it's been a stand by and extra.
Still works great, in fact it sat in my garage for a year, unused until last year. Worked every night without a glitch.
If you want a real fogger you'll have to give up gemmy, fitco and so on.
I like vei, but you're gonna pay for one. there is roscoe (ouch expensive...way) chauvet, not convinced on quality yet. American DJ, same as chauvet..just not sure. I kie what I like and that's what I sell. I have replace a couple of fitcos, not many, but for the money and budget...?
$59 for a 1000wt fogger is a pretty good deal in my book!
1 - 5 of 27 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.