Haunt Forum banner

1000 watt Fitco mega fogger and others

10941 Views 26 Replies 8 Participants Last post by  Vlad
I had the same problems that everyone else did with these piece of crap foggers:mad: , this is an email I sent to the manager at First Imperial Trading Company. This is the company that manufactures these products.....

I had purchased a 1000 watt mega fogger and a ground fogger from my local party city no more than a week ago. When I got the first one home I attempted to test it out. I filled up the resovoir with the fitco fog juice and let the machine run through its heating phase. When the machine was done heating up (the light turned on) I then turned on the remote for the machine and a nice high pressure burst of fog came out of the machine for about 3 minutes. After that the fogger went back into its reheating phase and when it was ready again I turned the remote back on and this time the fog did not come out. I unplugged the machine and let it cool down. The next day I attempted to retry the machine, I checked the fog juice to make sure there was enough in there and there was plenty. I let the machine heat up and then turned the remote on and no fog came out again. I exchanged that machine for a new one from party city thinking that it was a defective machine. The second machine did the same thing as the first. I am now on my third machine that is currently doing the same as the first two have been doing. As of right now, I am currently sure that it is a problem with the brand and not the indiviual machines. I am currently part of a halloween forum and there is about 8 other cases of this same behavior happening with your products. The ground fogger is also not working up to par. It is doing the same thing as the other fogger but instead of no fog coming out, there is a tiny bit but with no pressure. Party City is telling there customers that they will not take these foggers back so I am sure your company will find a way to keep happy customers, and to compensate the ones that are not to pleased at this moment.

The Manager's email is [email protected]

Please if you are having the same problems write him, see what we can do about this product! Since we all know Party City won't do anything:finger: . Overwelm his e-mail, lets kick this companies butt into gear!! :D

:xbones: Rebecca and Chris:xbones:
See less See more
1 - 4 of 27 Posts
When you guys say that you turned the remote back on and the fog didn't come out,
do you hear the pump running?
Take a look at the following link and give this a try.

Fogger Cleaning

I doubt that cleaning will fix the issue since these failed so quickly.

But it's worth a try...

Can you see the tube that goes into the fluid? If so, can you see
fluid being pulled from the reservoir?
Good to know Jeff... if they have sat for a while in the warehouse, then they could be plugged.
I try to have valuable input from time to time!? lol
Can't be wrong all the time eh? :D
1 - 4 of 27 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.