Haunt Forum banner

coffin and fogger tombstone

2245 Views 14 Replies 11 Participants Last post by  allreagray
Here are two new projects I am working on so far this year. The coffin is going to (hopefully) be pneumatic and is made of fence pickets. The fog chiller fits inside the tombstone and fog will come out of both sides.

1 - 4 of 15 Posts
Thanks everyone. Let's see, the fog chiller has a pvc "T" pipe in the cooler and splits off 2 ways using flexible aluminum dryer piping and will be filled with ice. As for the coffin, I'm waiting for some Bimba air cylinders that I bought on ebay. I'm going to attempt to make the doors open and have a bucky pop out. Probably also make a knocking, sound, fog and lights. No holding back on my first pneumatic, figure if I'm going to do it I might as well go all the way. I'm sure I'll need some help with the controller. Hopefully I'll have some updates over the weekend.
No plans, I just kind of winged it.
i have to fix my link. The stone pillars are 2x2 frame covered in 2" pink foam that I carved with an electric carving knife, like you use for turkey. Great stuff and oops paint from home depot.

1 - 4 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.