Haunt Forum banner
1 - 5 of 5 Posts

· Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hi all,
I have a lunging reaper that works intermittently, the sound and eyes work all the time but sometimes when you plug the power in, the mouth and lunging movement doesn’t do anything. Yet another time it will all work fine for a while then it will again stop lunging along with no mouth movement, any ideas anyone?
Many Thanks
Gary
 

· Registered
Joined
·
92 Posts
Is it possible that a couple of wires have come loose? How's your electronics skill?
 

· Registered
Joined
·
1,291 Posts
Guess you could try the jiggle / poke test. Jiggle, poke and wiggle various wires, connectors, boxes, mechanical joints, etc. See if any specific area causes it to act up (or start working normally if it was acting up). Does it give any indication that it is trying to move? That might point to something mechanical binding. Or if it seems completely not doing anything, that might be more on the electrical side.

If it works sometimes, that does seem to suggest there is something which can be fixed to make it work all the time. Though if it was totally dead that might be more permanent.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top