Haunt Forum banner
Status
Not open for further replies.

Dark Fanged Bat Lady's Scarecrow Entry

5K views 16 replies 14 participants last post by  PrettyGhoul 
#1 ·
Well... I hope i made it..... :googly: Here is my scarebat... :>


And here is the List and prices:

PVC = 8.49
pvc fittings = 12.70
fabric = 1.69
Latex = 7.00
beefnetting =0 .38
skull = 5.00
burgundy spray paint = 4.00
tan paint =0 .36
styrofoam inserts = 0.32
nylon spacers = 2.26
screws = 1.10
plastic clamps = 0.24
masking tape = 0.75
zip ties =0 .10
glue = 3.99
slupey clay = 0.25
cotter pins = 1.20
elmers glue = 0.10
black paint = free
tubing = freecycle
Grand Total = 49.93

Whew.... Ok... here is what i did... I made the wings with metal tubing that i got freecycle... and added nylon spacers over the cotter pins for the joints in the wings. Then painted on carpet latex over the beef netting which is glued to the fabric tubes covering the metal... I screwed them into the painted pvc, which was also screwed together. I sewed the clothes like a hospital gown and then ripped and snipped it... The hands were made from the coated wires from inside the metal tubing, then mached and painted... and stuffed into styrofoam which was then glued into the pvc arms... The head has a hole in the bottom so i stuck a piece of a pvc fitting inside the hole... whew.... if i have forgotten anything please let me know... :devil: Thanks for looking :>

Oh... here are some links to other pics of the scarebat. The first link is the one pic with the tape measure... It locks and is locked at 72 inches. :>

http://i77.photobucket.com/albums/j54/DarkFangBatLady/DSC00218.jpg

http://i77.photobucket.com/albums/j54/DarkFangBatLady/IMG_0190.jpg

http://i77.photobucket.com/albums/j54/DarkFangBatLady/DSC00225.jpg
 
See less See more
1
#9 ·
:> Thank you all for the vonderfuly kind words... It really means a great deal to me! :> Wish you could see my ear to ear grin! :D
You really think I should make a how to?..... Sure.. why not... LOL :googly: :) I'll let ya know when its done :D
 
#13 ·
Thank ya Dead, Erick with no K, and Darkness!!! :> Your positive commments mean the world to me!!!
This is only my 3rd prop... too bad i was close to the cut off for cash, or else it would have had LEDs in the eyes.... :devil: LOL It will have them before Halloween though... :>
 
Status
Not open for further replies.
You have insufficient privileges to reply here.
Top