Haunt Forum banner

1 - 17 of 17 Posts

·
Registered
Joined
·
96 Posts
erector photos and video

finally got a new air cylinder ($17.00 from e bay) and swapped out the aluminum for steel angle. should be a scream but somehow i stepped on the record button on my scream box so i'll have to record another. also have to dress it up a bit. maybe just some black cloth with some freaky fabric and dorp hanging off??
http://img147.imageshack.us/my.php?image=im002057ie0.jpg
http://img147.imageshack.us/my.php?image=im002051xn4.jpg
http://img147.imageshack.us/my.php?image=im002050po7.jpg
http://img147.imageshack.us/my.php?image=im002048da6.jpg
http://img147.imageshack.us/my.php?image=im002049xw1.jpg
http://img147.imageshack.us/my.php?image=im002054zx7.jpg
http://img147.imageshack.us/my.php?image=im002058uj1.jpg
 

·
Registered
Joined
·
96 Posts
Discussion Starter · #5 ·
thanks, i'm in the process of recording the scream now. i've done this a million times and was wondering if any one had a few tricks up there sleeves. not that they don't come out decent, but not as loud or deep as i would like. i know the radio shack dvr does have its limitations. does anyone record in mono not stereo? or maybe using mono 1/8" adapters. any ideas shout em out
 

·
Registered
Joined
·
2,805 Posts
I posted my kudos on your still pic thread, and the vid is great as well.

For the audio thing, for something totally different, check out forum member davethedead's posts in this section. He uses a hunter's rabbit call, hooked to a bleeder valve. No electricity required. I haven't tried it myself yet, but I looks like an excellent idea.

Any way, good looking prop, should scare a lot of folks.
 

·
Registered
Joined
·
4,949 Posts
Pics worked for me but something happened at about the fourth one but it looked like the web site not the links.

Anyho nice work
 

·
Registered
Joined
·
96 Posts
Discussion Starter · #15 ·
please excuse the poor lighting skills, but you get the idea. i think #3 came out the best:
[nomedia]http://www.youtube.com/watch?v=o8N7zZfhN4U[/nomedia]
[nomedia]http://www.youtube.com/watch?v=Udiry6YCbM4[/nomedia]
[nomedia]http://www.youtube.com/watch?v=DR2HgmJ5ES4[/nomedia]
 

·
Registered
Joined
·
96 Posts
Discussion Starter · #17 ·
the problem was that the last cylinder had only a 1/4" bore. it actually bent on another prop that i have and i tried to bend it back into place. worked for a little while but i figured it was only temporary til i got a new one. this one is about a 12" stroke and like a 3/4" bore. ($17.00 on ebay. + 10 shipping)
 
1 - 17 of 17 Posts
Top