Haunt Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
502 Posts
Really depends on what you are wanting in the way of a guillotine. I built one for the city I work for a couple of years back, since they were'nt to terribly specific on what they wanted, I did a boat load of research and built them the real deal, 13' tall, 30 pd. carriage & blade on rollers, everything works right down to the last detail. The only deviation was an unsharpened aluminum blade (still take your arm off though). I don't have a picture of it, but I liked it so well that I built an exact minature to scale (1" = 1'). Everything on it works as well, table tilts, neck restraint goes up & down, blade works on trigger release (RAZOR sharp steel blade this time). Even the leather strap works, buckle and all. The full sized one the city uses is only operated by a trained employee and civilians just see it on the drive by (it's in a Haunted Trail). If you Google "Guillotine", there is a bit of information out there. Here's a shot of the mini.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top