Haunt Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
708 Posts
Discussion Starter · #1 ·
So here’s my dilemma. I have an old inflatable that’s probably about 4.5 feet tall maybe? It’s not inflating enough to even fully stand up well. The fabric looks to be in good shape, it is still bright and colorful even. It’s a smaller version of an 8 foot one that got me into haunting, RIP “Fascinating Frank”. This one doesn’t even have lights in it, that’s how old it is. I tried using a heavy duty fan to blow through the fan to see if it’s the seams leaking but that didn’t work.

So here’s the question, has anyone tried stuffing one? I considered pulling the fan, putting a PVC armature in to stand it up and then filling with styrofoam peanuts or bubble wrap or polyester fill. Would this just be one big ole fiasco? This one doesn’t appear to have the fan secured with a zip tie, it’s like the fan is screwed to it or something. Obviously that would kill the whole “store in a little box” advantage but it’s almost useless now. Was just toying with the idea and wondered what y’all’s thoughts were on it. Not interested in great stuff, that would deform and never dry without proper air exposure and be a huge mess. There is a little sentimental value here even though it’s a small version of the original that is dead and gone or I would throw him away. Thanks!

Here is a pic of Little Frank.
Toy Gesture Art Happy Stuffed toy
 

· Registered
Joined
·
708 Posts
Discussion Starter · #3 ·
Thanks Corey! With the thinness of the fabric, you’re right, it would be bumpy/textured and would look awful. I tried blowing a strong fan through the current fan which worked way better in my head. I then tried isolating areas near the fan by holding the fabric tightly (so it was only blowing in his giant shoes) to see if that would tighten the fabric and it didn’t so I think it’s likely the fan but this was before inside lights/zippers so the only hole is through the fan location.

I bought it used so no clue what it’s previous life was like but I used it outside on Halloween maybe twice and it was only outside on Halloween and came in that night so it’s never seen a drop of water while on my watch. Considering how vibrant the colors are, it appears that it was well taken care of. After leaving the original out for a solid month for many years, the fabric faded, then shredded and disintegrated. This one worked fine, then sat in a box for a couple years and now it doesn’t work. Maybe I’m just making this way to hard (there’s something new…) and need to buy a new fan and hope replacing it is easier than I think.

Appreciate the thoughts and suggestions.
 

· Registered
Joined
·
708 Posts
Discussion Starter · #5 ·
I kind of came to the same place. It would definitely take several bags even if I used wadded up bubble wrap or peanuts in the center body area surrounded by the fiber fill. I also expect it would still need PVC or some kind of frame to keep it upright but I wonder if stuffing it would stress/weaken the material considering how thin it is and it would stay under stress from the stuffing vs deflating.
 

· Registered
Joined
·
708 Posts
Discussion Starter · #9 ·
Appreciate everyone’s suggestions. The 8 foot one is the one I had originally. Having thought about it, I’ve decided it is going to be more trouble than it’s worth with too much risk of it looking bad. Thank you to everyone for your help.
 
1 - 4 of 4 Posts
Top